Advertisement

This 12V compressor has been designed for inflating car, caravan, motorcycle tyres, sports and camping equipment. Please
read the user instructions carefully and use the compressor only in accordance with these Instructions.

Safety cautions:

Keep out of the reach of Children.
Dispose of the wrapping material. Plastic foils and/ or bags may be dangerous toys for children
Check the functionality of the device before each use.
Do not exceed the maximum allowable pressure for the inflatable.
Never leave the compressor unattended when working.
Never use the compressor continuously for more than 5 minutes; let it cool down for 15~30 minutes. The compressor
may overheat or get damaged if left running for too long.
The gauge reading of pressure is approximate → check the pressure using a calibrated pressure gauge.
Use the compressor only with 12V DC (e.g. 12V cigarette lighter socket in the car, 230V AC input / 12V DC output
adapter, etc.).
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
User Manual
Air Compressor
Keycode: 43058150

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 43058150 and is the answer not in the manual?

Questions and answers

Summary of Contents for anko 43058150

  • Page 1 User Manual Air Compressor Keycode: 43058150 This 12V compressor has been designed for inflating car, caravan, motorcycle tyres, sports and camping equipment. Please read the user instructions carefully and use the compressor only in accordance with these Instructions. Safety cautions: ⚫...
  • Page 2 1. Air hose with Valve nozzle 2. 12V DC adapter 3. ON/OFF switch 4. Pressure gauge 5. Extension inflate tube 6. LED light 7. Nozzle accessories Note: The switch for LED light and air compressor has a different print. See Below. Technical data: Power Source: DC 12 Volt...
  • Page 3 4) While inflating, watch the gauge (4) closely and stop the motor when the manufacturer’s recommended pressure has been achieved, turn the compressor off. 5) Unclip the valve nozzle and recheck the pressure using a calibrated pressure gauge. Inflating other inflatable objects: The adapters supplied in the package have been designed for various purposes (e.g.

Table of Contents