Specifications - Electro-Voice SL12-2V Specifications

SL12-2V High-Output, T wo- W ay Slant Surround Speaker System

Specifications

Axial Frequency response(swept sine
wave, 4 Volt at 10 feet on axis, in an
anechoic environment normalized to 1
watt/1 meter:
70 Hz- 20,000 Hz (figure 2)
Low frequency 3-dB-Down Point:
75 Hz
Half-Space Reference Effiency:
45 Hz
Long-Term Average Power-Handling
Capacity (per ANSI/EIA RS-426-A
1980):
200 watts
Maximum Woofer Acoustic Output:
3.82 watts
Sensitivity (SPL at 1 Watt 1 Meter with
a
nominal impedance, in an anechoic
environment, band-limited pink-noise
signal, 100- 16,000 Hz):
(See Figure 4)
93 dB
Beamwidth (angle include by 6-dB-down
points on polar responses, horizontal
and vertical planes. indicated one-third
octave bands of pink noise:
(See Figure 6)
Horizontal 400-12,500 Hz
110° (30°, -25°)
Vertical 2,000-12,500 Hz
95° (10°, -15°)
Directivity Factor R (Q), 800-16,000 Hz
q
Median (See Figure 7)
7.93dB (+4.5, -4.5)
Directivity Index D , 800-16,000 Hz
i
Median (See Figure 7)
6.12dB (+5.3, -4.3)
Distortion, 0.1 Full Power (see Figure 5)
Second Harmonic,
100 Hz -35dB, 1.8%
1,000 Hz -42dB, 0.8%
10,000 Hz -24dB, 6.3%
Third Harmonic,
100 Hz -45dB, 0.6%
1,000 Hz -42dB, 0.8%
10,000 Hz -43dB, 0.7%
Nominal Directivty:
Horizontal: 100°
Vertical : 90°
Transducer Complement,
Low Frequency:
12-inch woofer
High Frequency:
DH2010A and a 100° x 90° Horn
Crossover Frequency: (See Figure 9)
1,600 Hz
(12dB-per-octave slope)
Impedance: (See Figure 3)
Nominal 8 ohms
DC Resistance
6.9 ~ 7.1 ohms
Mounting: (See Figure 2)
Three 5/16-18 diameter holes left and
right for horizontal or vertical mount-
ing using ALLEN PRODUCTS
COMPANY INC. (2-1100C Bracket) and
four rear 1/4-20 mounting holes using
ALLEN PRODUCTS COMPANY INC.
(MultiMount TM -24) , allowing for
greater mounting versatility. The SL12-
2V is also equipped to accommodate
Acoustic Sound Products, Isolation
mounts. As well as two support points
for added securely.
Material:
V-folded black vinyl-clad particle
board with a Black cloth Grille.
Input Connectors: (See Figure 2)
#10 screw terminals for Input and
Jumper selectivity for Flat or ISO
response.
Dimensions Bass: (See Figure 2)
Height:
(53.52 cm) 21.07 in
Width:
(47.63 cm) 18.75 in.
Depth:
(33.5 cm) 13.20 in.
Net Weight:
(21.3 kg) 47 lb
Shipping Weight:
(25.4 kg) 58 lb
Shipping Carton Dimensions:
26.5 in W. x 21 in D. x 19.25 in H.
7