Jeulin Guppy F033B Notice page 14

ESAO Method
Gyppy rapid camera
Ref :
451 462
ENGLISH
- Connect your rapid camera to your console (fig. 2) using the cable supplied
with the latter.
- Power on your PC and then power on your console.
4 Adjustment
4.1 Positioning
- Place the camera directly opposite your experiment device.
Your scientific workshop software allows simple adjustment of the camera. It
appears in the list of sensors presented on the interface.
- Drag the camera along the ordinate axis then click on the icon; you will then
see the adjustment menu.
On ticking video display, the image of the camera appears in the workshop.
- Adjust the lens focus by rotating the ring of the latter to obtain a clear image.
- Adjust the light by turning the lens diaphragm ring.
The exposure time is set automatically by the software.
13
Fig.2
IEEE cable
connector
Cable synchro
connector
Camera
icon