DMC HPU13M Datasheet

Battery-powered pump

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Battery-powered Pump

DATASHEET

HPU13M

Read and understand all of the instructions and safety

information in this manual before operating or servicing

this tool.

526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161

www.dmctools.com

Table of Contents

Need help?

Do you have a question about the HPU13M and is the answer not in the manual?

Questions and answers

Summary of Contents for DMC HPU13M

Page 1 Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP. 526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161 ALL RIGHTS RESERVED www.dmctools.com...
Page 2: Table Of Contents
Troubleshooting ..............11 Limitation of Liability and Warranty ........12 Safety Safety is essential in the use and maintenance of DMC tools and equipment. This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.
Page 3: Important Safety Information
SAFETY ALERT Do not connect the pump to any system or system compo- nent other than those supplied by DMC. Other manufactur- SYMBOL ers’ components may not withstand the maximum pressure and may fail. Nearby personnel can be injured by flying components and hydraulic oil.
Page 4 Inspect pump, hoses, couplers, and fittings for wear or damage. Replace worn, damaged, or missing components • Do not expose power tools to rain. with DMC replacement parts. Worn or damaged compo- • Do not immerse the pendant switch in nents can fail, resulting in injury.
Page 5 Failure to observe this precaution may result in injury and property damage. Note: Keep all decals clean and legible, and replace when necessary. HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP. 526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161 ALL RIGHTS RESERVED www.dmctools.com...
Page 6: Identification
Operating Temperature Range ..........10 °F to 104 °F (-12°C to 40 °C) Dual-Stage Pumping Action Rapid Advance ......................0.9 l/min At Full Pressure ......................0.3 l/min HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP. 526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161 ALL RIGHTS RESERVED www.dmctools.com...
Page 7: Features Of The Pump
• An optional foot pedal actuator (HPU13M-FP) is available for purchase through DMC and can be used in place of the provided hand pendant. To us the foot pedal, remove the hand pendant from the Pendant Switch Socket (item 9) and install the foot pedal connector into that Socket.
Page 8: Operation
Skin injection hazard: damage. Replace worn, damaged, or missing components • Do not use hands to check for leaks. with DMC replacement parts. Worn or damaged compo- • Depressurize hydraulic system before nents can fail, resulting in injury. servicing or disconnecting the hose.
Page 10: Maintenance
Failure to observe this warning could 1. Replace the hydraulic oil. result in serious injury, gangrene, or 2. Send the tool to DMC for inspection. death. Checking the Hydraulic Fluid Level The pump has an oil plug with inspection glass, which can be used to determine the proper oil level.
Page 11: Troubleshooting
LED glows for 20 seconds. Battery charge low. Charge or replace battery. Tool loses oil. Damaged internal seal. Return tool to DMC. HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP. 526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161 ALL RIGHTS RESERVED www.dmctools.com...
Page 12: Limitation Of Liability And Warranty
DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such product which proves defective in normal service within ninety (90) days after delivery to the first user, provided that the product is returned to DMC with all transportation charges prepaid and which shall appear to DMC’s satisfaction, after DMC’s...