Page 1 GE Healthcare SEER ™ 1000 ECG recorder and software-app usage instructions version 1.0 2067634-131 Revision E SEER ™ 1000 ECG recorder and software-Portuguese app © 2016 General Electric Company All rights reserved...
Page 2 Using the Apple iOS App Using the Apple iOS App ", Page 61 ", Page 61 ", Page 61 ", Page 61 Please contact the site is representative of GE Healthcare regarding other applicable documents. 2067634-131 Revision E SEER ™ 1000 November 3, 2015...
Page 3: Table Of Contents
Content Introduction ......................9 Target group ............................10 Indication ............................10 Goal ............................10 Contraindications ........................10 Device subject to prescription .................... 10 Regulations and safety information ..............11 The meaning of the signal words ..........
Page 4 Product Overview ..................33 Recorder App - General ..................33 Control elements of the recorder ................34 Event button ......................35 LED of the event buttons ..................36 LED of electrodes ....................36 ..Acoustic messages ..........
Page 5 Apps - General information ................55 Functionality ..........................56 Privacy policy ......................57 data protection in the App ..................57 Data protection on the recorder ................57 Basic information about the wireless connection Bluetooth ........58 Using the Apple iOS App ..........
Page 6 Prepare and start the ECG guide - ECG ..................88 Add or select a patient, connect to a recorder ........................ 88 Arrangement of electrodes and signal quality ..........91 Check or change the settings ..............92 Start recording ..........
Page 7 Electronics ....................116 ........Mechanical ............................116 Environmental conditions ......................117 Bluetooth module ........................117 Specifications EMC IEC 60601-1-2 ............ 118 General specifications table 201 ..........118 ......General specifications table 202 ..............119 Systems of non-life support table 204 ........
Page 9: Introduction
* Long-term MARS ECG analysis system supports the ECG recording during a period of up to three days. All three SEER 1000 ECG recorders are for use both in adults, but also suitable for pediatric patients (including patients weighing less than 10 kg). Inquire please about any restrictions on the long-term ECG analysis seusoftware operating instructions.
Page 10: Target Group
Indication The SEER 1000 is a recorder to ECG long-term, indicated for patients who could benefit from a continuous long-term ECG recording. These are for example patients who complain of palpitations, chest pain or shortness of breath, or patients who should be monitored for their ability current heart can be evaluated.
Page 11: Regulations And Safety Information
Introduction Regulations and safety information This section contains information on the safe use of this system and compliance with legal requirements. Familiarize yourself with this information, and read and understand all instructions before attempting to use this system. The system software is seen as a medical software. As such, it was designed and built in accordance with the relevant regulations and health controls.
Page 12: Safety Instructions
WARNINGS NOTICE NO MONITORING DEVICE - The SEER 1000 is not a monitoring device and is not suitable for monitoring the patient's clinical status. Do not use the SEER 1000 as a monitoring device.
Page 13 Introduction NOTICE CABLE - Cables pose a strangulation risk To avoid a potential bottleneck situation route all cables away from the patient's neck. Use in pediatric patients short versions of the cable. NOTICE Conductive Materials - can result in electric shock or malfunction of the device, if the electrodes come in contact with conductive materials.
Page 14 Introduction NOTICE CHOKING HAZARD - Packaging materials are a choking hazard. Do not leave packaging material within reach of children. INDICATIONS OF CAUTION CAUTION RISK OF INFECTION - The re-use of consumables, which come into contact with the patient present a risk of infecting other patients. Do not use consumables (eg, electrodes) after they have already been used on a patient.
Page 15 Introduction ATTENTION POOR QUALITY OF ECG RECORDINGS - may be of insufficient quality of ECG recordings, if the patient is not properly prepared. Properly prepare the patient for recording, as explained in section " Properly prepare the patient for recording, as explained in section " Preparing for Preparing for recording...
Page 16 Dispose of the device and accessories at the end of life, the way required by local and national regulations. If you have questions about the disposal of this product, entr contact GE Healthcare or an authorized GE Healthcare representative. 2067634-131 Revision E...
Page 17: Medical Device Classification
Introduction ATTENTION RECORDINGS OF LOSS OR INSUFFICIENT ECG SIGNAL QUALITY - It may be that the recorder be used with unsatisfactory results if the patient does not have all the necessary information. It is the responsibility of the physician, give the patient the necessary information for an evaluable ECG recording.
Page 18: Certification
Introduction Certification Medical equipment Certification with respect to electrical shock, fire and mechanical hazards only in accordance with IEC 60601-1 CAN / USA C22.2 NO. 601.1, IEC 60601-1-2 and IEC 60601-2-47. Accuracy of the input signal The amplitude frequency response corresponds to the following requirements of IEC 60601-2-47 Section 51.5.9: •...
Page 19: Biocompatibility
The system components described in this manual, including accessories that, when used as prescribed, come in contact with the patient meet the biocompatibility requirements of the relevant standards. If you have questions about this, please contact GE Healthcare or their representatives.
Page 20: Manufacturer's Responsibility
• assembly, extensions, adjustments, modifications or repairs are performed by people they have been authorized to do so by GE Healthcare. • The electrical installation of the relevant room complies with their standards. •...
Page 21 Introduction Meaning Symbol Serial number It refers to the manufacturer's serial number. Serial number It refers to the manufacturer's serial number. Manufacturer, name and address It refers to the name and address of the manufacturer of the appliance. Manufacturing date (year) Refers to the original date of manufacture of this device.
Page 22 Introduction Meaning Symbol International Protection Code (Ingress IP43 Protection Rating) Classifies and assesses protection against ingress of solid foreign bodies (such as body parts like hands and fingers, dust, accidental contact) and liquids. The first number (4) represents protection against solid objects, in this case, the protection against penetration of objects with a diameter above 1.0 The second number (3) is the protection against the penetration of...
Page 23 Introduction Meaning Symbol Follow the instructions for use Read and understand the operating instructions before using the device or product. As a sign of a binding measure this symbol is marked by a blue background and white symbol. Temperature limits It refers to the upper and lower temperature limit for the transport, storage and handling of the package.
Page 24 Introduction Meaning Symbol Japan RoHS It indicates that the device or product complies with the Japanese provisions, which restricts or prohibits the use of certain substances in electrical devices. A green check mark (with G) refers to the fact that the product does not exceed the limits of hazardous chemicals.
Page 25 This symbol is selected in the SEER 1000 applications when a disposable alkaline battery is used. Accumulator This symbol is selected in the SEER 1000 applications when a NiMH battery is used.
Page 26 Introduction Meaning Symbol Recording stop This symbol is used in the iOS app from Apple to stop recording. Recording stop • This symbol is used in Microsoft Windows application, to stop recording. Female This symbol is used in applications for female patients. Male This symbol is used in applications for male patients.
Page 27 Introduction Where the labels This section describes the labels and where they are on your device or its packaging. In the section " section " section " symbols symbols symbols "On page 20 are more detailed explanations. "On page 20 are more detailed explanations. "On page 20 are more detailed explanations.
Page 28: Identification Of Equipment
Introduction Equipment Identification Each of the GE Healthcare device has a type plate that contains the product name, part number, the manufacturer's information and the unique serial number. This information is necessary when you have to contact the service center GE Healthcare.
Page 29: Serial Number And Format Of The Product Code
99999 Information about maintenance This section contains information about maintenance and system care. Familiarize yourself with this information before charge GE Healthcare or authorized representatives with the maintenance work. Maintenance requirements: If the people responsible, hospitals or institutions that use this device failing to implement an adequate maintenance plan, this can lead to device failure and potential security threats.
Page 30: Warranty Information
Healthcare or one of the authorized representatives. warranty information This product is distributed by GE Healthcare. The appliance should be serviced only by authorized service personnel of GE Healthcare. In the case of an inadequate repair of the device can cancel the existing security. additional help...
Page 31: Convention For The Manual
In this manual, the following conventions are used: typographical conventions The following table shows the conventions used in this document in other documents of GE Healthcare Diagnostic Cardiology and third-party products document, whose products are distributed by GE Healthcare Diagnostic Cardiology. Convention description Bold Indicates the keys on the keyboard to type text or hardware features, such as buttons or device key.
Page 32: Other Applicable Documents
Other applicable documents The following documents provide additional information that may be helpful in the installation, configuration, maintenance and use of this system. Part Number Title SEER 1000 Reference Manual of spare parts and accessories 2067634-132 Brief instruction SEER 1000 2067634-133 2067634-131 Revision E SEER ™...
Page 33: Product Overview
PC with a Microsoft Windows operating system. Both Apps are used for the preparation of the patient to transfer patient data to a recorder to verify the signal quality and to start recording. The SEER 1000 recorder can also be used without using the Apps.
Page 34: Control Elements Of The Recorder
Product Overview For the assessment, the ECG recordings can be read via a special USB cable to the PC. Control elements of the recorder 1. Event button 1. Event button 2. LED event of buttons 2. LED event of buttons 3.
Page 35: Event Button
Product Overview Event button This button has the following functions: The user action Function Press and hold the button for more than three seconds Turning on / off the until you hear a beep. recorder NOTE After recording has started, the recorder can only be switched off if the battery is removed.
Page 36: Led Of The Event Buttons
Product Overview LED event of buttons This bicolor LED indicates the recorder status. State recorder Indication LED Ready to record illuminated in green progress recording intermittent flashes green Event was marked (by pressing the lights in green and off Event button) existing recording yellow lights slowly flashes yellow...
Page 37: Acoustic Messages
Product Overview NOTE After connecting the recorder, the two LEDs light up for 0.5 second in green and then yellow to inform the user about their operational readiness. acoustic messages The recorder warns acoustically as follows: state ringer tape recorder simple acoustic signal recording began Double acoustic signal...
Page 39: Preparing For Recording
Preparing for recording This chapter provides information on how to inform the patient, prepare the patient's skin, correctly position the electrodes and start recording without the use of an App. NOTE Explanations of how to use the App to start recording, in the " Explanations of how to use the App to start recording, in the "...
Page 40: Inform The Patient
Preparing for recording Start recording. Inform the patient It is the responsibility of the physician, the patient provide the safety information required for safe and effective ECG recording. Safety notes for the patient • Inform the doctor if any skin problems. In rare cases, there may be allergic reactions, even if they are used biocompatible electrodes.
Page 41: Recording Daily
Preparing for recording • Do not use an electric blanket, when using the recorder. Recording daily In the journal header, data for patient identification for identifying the recording, as well as medication during recording should be recorded. In the diary of the patient, the patient should at least enter: •...
Page 42: Electrodes Installation
5. See if the LEDs electrodes indicate any problems electrodes NOTE Only use electrodes and adhesive materials, recommended by GE Healthcare. electrodes installation This section describes how to install electrodes to a long-term ECG with 2 and 3 channels. CAUTION CORRECTION RIGHT OF ELECTRODES CABLE - A wrong connection causes inaccuracies in the ECG.
Page 43: Arrangement Electrodes 7 To Three Ecg Channels
Preparing for recording Attaching the tape loose enough so that no gel is pressed onto the adhesive surfaces of the electrodes. Arrangement electrodes 7 to three ECG channels Seven electrodes are placed and connected with lines of different colors to record an ECG three channels.
Page 44: Electrode Arrangement For Two Ecg Channels
Preparing for recording 5 Electrode arrangement for two ECG channels The five electrodes are placed and connected with lines of different colors to record an ECG two channels. color coding AHA Color coding IEC IEC color AHA colors Position Channel front left axillary line, fifth rib Green 1 (+)
Page 45: Layout Of 3 Electrodes For Recording 3-Channel Ecg Nãoindependentes
Preparing for recording Arrangement for recording electrodes 3 3 non-independent channels of ECG To record ECG three non-independent channels, three electrodes are placed and connected with wires of different color. AHA Color Coding IEC Color Coding Position Color AHA / Designation Color IEC / Designation manubriosternal right edge right of the White...
Page 46: Connect The Ecg Cable To The Recorder And The Electrodes
Preparing for recording Connect the ECG cable to the recorder and the electrodes NOTE When both LEDs flash three times per second, alternately green and yellow, the recorder is defective and needs a service assistance. In the section " is defective and needs a service assistance. In the section " How to inform the service How to inform the service that the recorder is faulty...
Page 47: Place The Stack
Preparing for recording ATTENTION DAMAGE IN CONNECTION CABLE AND - Excessive force can damage the connection and cable. Never use force to insert the patient cable or the USB cable to the recorder. Do not bend the patient cable and do not wrap it around the recorder. If the plug ECG cable or USB download cable is inserted incorrectly, this could cause serious damage to the machine.
Page 48: Replace Or Replace The Battery Cover
Preparing for recording Replace or replace the battery cover To open the battery compartment, you must slide the battery compartment lock back, as shown To open the battery compartment, you must slide the battery compartment lock back, as shown To open the battery compartment, you must slide the battery compartment lock back, as shown in the previous section.
Page 49: Connecting Recorder
Preparing for recording Connecting Recorder press Event button in the center of the recorder housing, to turn on the recorder. press Event button in the center of the recorder housing, to turn on the recorder. press Event button in the center of the recorder housing, to turn on the recorder. NOTE When both LEDs flash three times per second, alternately green and yellow, the recorder is defective and needs a service assistance.
Page 50: Auto-Start
Preparing for recording NOTE If you have an App, it can also start this recording with her, having chosen or added a patient and after having tested the signal quality. In the following chapters are more information about Apps: " "...
Page 51: Automatic Shutdown
Preparing for recording auto Power Off If no recording is started, if no action is taken and no valid signal is present, the recorder automatically turns off after eight minutes. The eight minutes of time period begins again, • each time that a wireless connection is established, •...
Page 53: Measures After The End Of The Recording
Measures after the end of the recording Measures after the end of the recording The recorder automatically turns off when it reaches the set recording time. CAUTION LOSS OF DATA - The recorder stores data for at least one week after the end of the recording.
Page 54: Import Recording To The Pc
Read the instructions for use of the software analysis and evaluation of reading and data import. Compatible Evaluation Software The data stored on the devices are compatible with the evaluation software GETEMED CardioDay 2.4 (and higher) and the ECG system GE Healthcare MARS Ambulatory V8.0 SP3 (and higher). 2067634-131 Revision E SEER ™ 1000...
Page 55: Apps - General Information
Apps - General information Apps - General information your Apps are available. A works under the operating system Apple iOS on an iPod touch, iPhone or iPad. The other works as an independent software on a PC under the Microsoft Windows operating system Windows operating system ®.
Page 56: Functionality
Apps - General information O Do not install the software on a computer that is O Do not install the software on a computer that is regularly used to transmit information from the Internet. O Store patient data and recording at intervals O Store patient data and recording at intervals Regular by appropriate storage procedures.
Page 57: Privacy Policy
Apps - General information • define the function with which the data is imported from a recorder and automatically deleted after imported Data exchange between the Apps and engravers is wireless. Privacy policy For data protection, both Apps use an access control with two password protection levels. On the first level is used the administrator password and the second level, the password for the ECG technician.
Page 58: Basic Information About The Wireless Connection Bluetooth
DOES NOT IDEAL - If you are using a Bluetooth device, which was not supplied by GE Healthcare, can not be guaranteed optimal operation. Use only the supplied Bluetooth equipment from GE Healthcare, because the Bluetooth technology has been tested and proven with this equipment.
Page 59 Apps - General information frequency (e.g., WLAN) are used, each of the other nearby. Other devices can also interfere with the system, even if they meet the CISPR emission requirements. ATTENTION When used with the Bluetooth connection, the recorder consumes more electricity and desired recording time, intensive, can not be achieved.
Page 61: Using The Apple Ios App
"On page 68. Install and configure the application The App SEER 1000 is supported by many iPad, iPhone and iPod touch. If the App is available for your mobile, you will find its description in the App Store. Install and launch the application Tap the icon to open App Store.
Page 62: Change The Admin Password
Using the Apple iOS App Change the administrator password The application is password protected against inadvertent access the recorder. GE recommends that you change the default password on your first login. Use the same password administrator to connect all the software programs supported by the recorder (App iOS, PC App, CardioDay and CardioRead).
Page 63: Add Technical Or Reset The Password Coach
Using the Apple iOS App Replace the administrator password standard, typing your new password. Replace the administrator password standard, typing your new password. Replace the administrator password standard, typing your new password. The new password must be at least eight characters. tap Set a new administrator password.
Page 64 Using the Apple iOS App Below the window Technical They are presented three selection fields: Below the window Technical They are presented three selection fields: Below the window Technical They are presented three selection fields: Add technical, As explained in this section, Change Password Admin, and application Add technical, As explained in this section, Change Password Admin, and application Add technical, As explained in this section, Change Password Admin, and application Add technical, As explained in this section, Change Password Admin, and application...
Page 65 Using the Apple iOS App 2. type the technician ID. 2. type the technician ID. 2. type the technician ID. tap To save. tap To save. tap Leave, to return to technical record. tap Leave, to return to technical record. tap Leave, to return to technical record.
Page 66: Configure The Connection To Muse Wish List
Enter the settings for the connection order interface WebAPI MUSE. Contact the administrator of your MUSE website or service personnel of GE Healthcare for information on the correct configuration settings. URL must be entered as the base URL for the REST interface, followed by the port number, for example http://192.168.0.20:8100 or http://MUSEComputer.domain.com:8100...
Page 67 Using the Apple iOS App NOTE: both are supported URL with host names as IP addresses. The IP port number WebAPI service (default 8100) must be part of the URL configuration. click in Test Connection, if you want to test the connection to the configured MUSE click in Test Connection, if you want to test the connection to the configured MUSE click in Test Connection, if you want to test the connection to the configured MUSE wish list.
Page 68: Reset The Application
Using the Apple iOS App Reset the application If the administrator forgets the administrator password, the system can be reset to the default settings. ATTENTION The function Reset the application will erase all data and reset the application to the The function Reset the application will erase all data and reset the application to the The function Reset the application will erase all data and reset the application to the default settings.
Page 69: Save Technician Id
Using the Apple iOS App Tap the application icon to open the application. 2. type the Technical ID, that the administrator has set for you. 2. type the Technical ID, that the administrator has set for you. 2. type the Technical ID, that the administrator has set for you. 2.
Page 70: The Tab "Patient" - Prepare And Start Ecg Recording
Using the Apple iOS App Drag the circle on the right side to the right, until the icon is displayed in blue. The tab "Patient" - Prepare and start ECG recording If you prepared the recording as described in the " If you prepared the recording as described in the "...
Page 71 Using the Apple iOS App Enter patient data manually tap Add patient, tap Add patient, 2. enter patient data in the window Add patient. 2. enter patient data in the window Add patient. 2. enter patient data in the window Add patient. You must enter at least Patient ID.
Page 72 Using the Apple iOS App click in question order to open the applications list. click in question order to open the applications list. click in question order to open the applications list. NOTE MUSE only are applications for long-term ECG recordings to the state Open. If no application MUSE only are applications for long-term ECG recordings to the state Open.
Page 73: Change Or Delete Patient Input
Using the Apple iOS App Select your patient and continue as explained in section " Select your patient and continue as explained in section " Select your patient and continue as explained in section " Enter patient data manually Enter patient data manually Enter patient data manually ", Page ", Page...
Page 74: Search Appliance
Using the Apple iOS App To delete a patient entry, swipe from right to left on the patient input selected. Then tap the field Delete, shown on the right of the entrance. field Delete, shown on the right of the entrance. field Delete, shown on the right of the entrance.
Page 75 Using the Apple iOS App If you selected the recorder in the accessory list, the recorder and the App iOS are paired via Bluetooth. If the recorder has not yet been paired with the App iOS, iOS operating system prompts the user to confirm the pairing request Bluetooth. If a SEER recorder has been found and paired successfully with App iOS, it appears in the list of connected devices.
Page 76: Arrangement Of Electrodes And Signal Quality
Using the Apple iOS App Arrangement of electrodes and signal quality NOTICE CURVES QUALITY DIAGNOSTIC ECG - ECG curves displayed in the preview window are designed exclusively for evaluating the signal quality. Do not use these preview curves for diagnostic purposes. CAUTION SIGNAL QUALITY - If tapping the electrodes cause severe muscle interference or artifacts, or if they result from the patient's movements, it is possible that the electrodes...
Page 77: Check Or Change The Settings
Using the Apple iOS App The two corresponding electrodes are shown to the left of each curve. If an electrode is loose, it appears a red line around the respective pair of electrodes and a red indicator on the trunk. Double-click the ECG curve to increase or decrease the presentation again.
Page 78: Start Recording
Using the Apple iOS App recording duration, tap Pelousuário defined, to the desired time and tap To define. recording duration, tap Pelousuário defined, to the desired time and tap To define. recording duration, tap Pelousuário defined, to the desired time and tap To define. recording duration, tap Pelousuário defined, to the desired time and tap To define.
Page 79 Using the Apple iOS App NOTE If the recorder is already recording, you must activate the Bluetooth module recorder by pressing the Events button for more than three seconds until you hear a multiple acoustic pressing the Events button for more than three seconds until you hear a multiple acoustic pressing the Events button for more than three seconds until you hear a multiple acoustic signal.
Page 81: Using Microsoft Windows App
Install and configure the application NOTICE POSSIBLE DISTURBANCES - A safe and effective use of SEER 1000 Mobile Application is only possible with the appropriate hardware. The PC used should correspond to the latest version of the international standard IEC 60950.
Page 82: Using A Bluetooth Adapter
Using Microsoft Windows App Component Specification 1024 x 768 pixels Screen CD drive required Interface USB interface for Bluetooth adapter Keyboard Standard PS / 2, USB or wireless Mouse Standard PS / 2, USB or wireless, 2 or 3 keys installation means 1 CD Using a Bluetooth adapter...
Page 83: Install And Launch The Pc Application
To remove the PC application, open System control on the PC, select Add and Remove To remove the PC application, open System control on the PC, select Add and Remove Programs or Programs and resources and remove SEER 1000 Programs or Programs and resources and remove SEER 1000...
Page 84 Using Microsoft Windows App ATTENTION UNAUTHORIZED ACCESS TO THE RECORDER - The administrator password is used to protect the recorder against unauthorized access. Always change the password, if necessary, for example, if you have been advised to unauthorized persons. NOTE Only the administrator can create Technical IDs or reset to the default password.
Page 85: Add Technical Or Reset The Password Coach
Using Microsoft Windows App Add technical or reset the password coach Only the application administrator can add Technical IDs and reset the passwords for the default Only the application administrator can add Technical IDs and reset the passwords for the default Only the application administrator can add Technical IDs and reset the passwords for the default password.
Page 86: Reset The Application
Using Microsoft Windows App 3. Click the symbol •• to open the window Edit technician. 3. Click the symbol •• to open the window Edit technician. 3. Click the symbol •• to open the window Edit technician. 3. Click the symbol •• to open the window Edit technician. 3.
Page 87: Start The Application And Change The Technician Password
Using Microsoft Windows App tap Reset the application in the window Administrator. tap Reset the application in the window Administrator. tap Reset the application in the window Administrator. tap Reset the application in the window Administrator. 2. Enter the default administrator password 14,012,013. 2.
Page 88: Prepare And Start The Ecg Guide - Ecg
Using Microsoft Windows App 2. type the ID, that the administrator has set for you. 2. type the ID, that the administrator has set for you. 2. type the ID, that the administrator has set for you. 2. type the ID, that the administrator has set for you. 3.
Page 89 Using Microsoft Windows App arrow keys <up> and <down> to change values. 3. click in Continue if you want to start a recording 3. click in Continue if you want to start a recording 3. click in Continue if you want to start a recording 3.
Page 90 Using Microsoft Windows App 7. click in Cancel, if the message ( Amount) 7. click in Cancel, if the message ( Amount) 7. click in Cancel, if the message ( Amount) 7. click in Cancel, if the message ( Amount) 7.
Page 91: Arrangement Of Electrodes And Signal Quality
Using Microsoft Windows App Arrangement of electrodes and signal quality NOTICE CURVES QUALITY DIAGNOSTIC ECG - ECG curves displayed in the preview window are designed exclusively for evaluating the signal quality. Do not use these preview curves for diagnostic purposes. CAUTION SIGNAL QUALITY - If tapping the electrodes cause severe muscle interference or artifacts, or if they result from the patient's movements, it is possible that the electrodes...
Page 92: Check Or Change The Settings
Using Microsoft Windows App The two corresponding electrodes are shown to the left of each curve. If an electrode is loose, it appears a red line around the respective pair of electrodes and a red indicator on the trunk. Double-click the ECG curve or trunk, to increase or decrease the presentation again. Check or change the settings With the application you can select or change the type of battery and recording time.
Page 93: Start Recording
Using Microsoft Windows App The autodelete option The option autodelete It is a burner configuration. The default setting is recorder On The option autodelete It is a burner configuration. The default setting is recorder On The option autodelete It is a burner configuration. The default setting is recorder On The option autodelete It is a burner configuration.
Page 94: The "Device" Tab
Using Microsoft Windows App To view the patient list, click on the tab Patients. To view the patient list, click on the tab Patients. • • To delete a patient recording, select the patient and click on the symbol •. To delete a patient recording, select the patient and click on the symbol •.
Page 95 Using Microsoft Windows App NOTE If the recorder is already recording, you must activate the Bluetooth module recorder by pressing the Events button for more than three seconds until you hear a multiple acoustic pressing the Events button for more than three seconds until you hear a multiple acoustic pressing the Events button for more than three seconds until you hear a multiple acoustic signal.
Page 97: Problems Solution
Problems solution Problems solution This section describes the error signals and provides recommendations for troubleshooting. Recorder Troubleshooting error signal Cause Recommendation At LED event keys At LED event keys The voltage disposable battery The disposable battery is low or the blink once per second.
Page 98 Use to this, during ECG analysis software prazoou SEER 1000 App. O LED event button O LED event button The recording was Possibly the recording was started...
Page 99: Application Error Messages
Problems solution Application error messages Message Recommendation The recorder is at the moment, protected by a "The password stored in the recorder does not match the administrator password." protection code, which was generated from another administrator password. Use an application that is controlled by the correct administrator password, or ask your administrator to reset the recorder to the Microsoft Windows application.
Page 100 Problems solution Message Recommendation "Error deleting data. Please make sure the recorder is When the recorder is connected via USB connected via USB to a different software. " connection with a long-term ECG analysis software, for example, for example to read a record, wait until the data transfer is completed.
Page 101 Problems solution Message Recommendation "Error start recording." • If the recording is running (LED event keys flash flashing green), no response was not recorded by the recorder application. The patient was not automatically deleted from the list after the start of recording. In this case, go to the tab "Patient"...
Page 102 Problems solution Message Recommendation Make sure Bluetooth is turned on the recorder "Connection error." and try again. Make sure the Bluetooth device is enabled on your Apple iOS. Make sure that your device (Microsoft Windows and Apple iOS) is no longer connected to another Bluetooth device.
Page 103 Problems solution Message Recommendation "Battery level too low, recorder is not turned off." Insert a new disposable alkaline battery or an NiMH battery that is sufficiently charged. "The recorder is recording, you want to select a a recording is already in progress. Stop and recorder differently?"...
Page 104: Bluetooth Connection Malfunctions
Problems solution Bluetooth connection failures error signal Cause Recommendation The recorder and the application of For best results, the devices do not Error connecting the device are very close or very place at a distance of 0.5 m between recorders and applications distant them at a distance of not more than 10 m between them.
Page 105: Connection Faults Muse
Problems solution Connection faults MUSE error signal Cause Recommendation MUSE connection URL must be entered as the base URL for the REST incorrect URL. interface, followed by the port number, for example test failed in the http://192.168.0.20:8100 or configuration. Missing field question order field question order http://MUSEComputer.domain.com:8100 .
Page 106: Bluetooth Messages Microsoft Windows System
Problems solution Bluetooth messages Microsoft Windows System Some problems setting up the Bluetooth connection between the PC and the recorder are reported by the PC operating system. The application attempts to propose a solution, but may be the cause of the problem can not be determined at all. In this case, they are displayed system messages and their error codes.
Page 107: Reset With Microsoft Windows App
Problems solution 3. Type "Administrator" in the first line of the window Register. 3. Type "Administrator" in the first line of the window Register. 3. Type "Administrator" in the first line of the window Register. 4. Enter the administrator password the second line. 4.
Page 108 Problems solution 3. Type "Administrator" in the first line of the window Register. 3. Type "Administrator" in the first line of the window Register. 3. Type "Administrator" in the first line of the window Register. 4. Enter the administrator password the second line. 4.
Page 109: How To Inform The Service That The Recorder Is Defective
Problems solution How to inform the service that the recorder is faulty If the recorder is faulty, this is detected during self-test after turning on. If the self-test during a fault is detected, the following sequence flashing LED warns that a problem was detected: •...
Page 110 Problems solution 2067634-131 Revision E SEER ™ 1000...
Page 111: Maintenance
Maintenance Perform the following maintenance procedures as described. Perform daily by visual inspection. If verified that any parts need to be repaired, contact an authorized service representative GE Healthcare so that repair work can be carried out. Attention indications ATTENTION EQUIPMENT DAMAGE - Some chemicals can damage the plastic housing of the device and cables.
Page 112: Clean And Disinfect Recorder
Maintenance • To clean the device, the ECG cable or line electrodes should not ever be used conductive solutions, or solutions containing chlorides, wax or wax components. • Do not use solutions or products, containing ammonium chloride compounds, such O benzyl ammonium chloride Dimethyl O benzyl ammonium chloride Dimethyl O Solutions containing quaternary ammonium chloride O Solutions containing quaternary ammonium chloride...
Page 113: Clean The Recorder Bag
Maintenance O Any sodium hypochlorite solution that meets all O Any sodium hypochlorite solution that meets all criteria of the policy. • The device and accessories must not be sterilized. Cleaning the recorder's bag One can wash the bag by hand or 60 ° C in the washing machine. Leave the bag completely dry after washing.
Page 114: Disinfect Ecg Cable
Maintenance 1. Before cleaning, the cable pull device. 1. Before cleaning, the cable pull device. Clean the cables with a cloth moistened with a mild soap solution or alcohol with 70 volumes. Clean the surfaces with a clean cloth or paper towel. Disinfect ECG cable Proceed as follows to disinfect the cable: 1.
Page 115: The
Technical data Technical data This section lists the technical data of the SEER 1000 ECG recorder. General Component description recorded channels Two or three ECG channels, depending on the type of cable connected, pacemaker pulses Detection of pacemaker On all channels Recording duration 24 hours, 48 ...
Page 116: Electronics
Technical data Component description Accuracy of time ± 30 seconds per month (If a recording is started by the application, clock is synchronized with the application of the device clock, on departure of recording) storage means digital memory, permanently installed data exchange means USB 2.0 Electronics...
Page 117: Environmental Conditions
Technical data Component description Protection against ingress of foreign IP43 bodies and liquids Vibration Tolerance During use: 0.5 g (10 to 20 Hz) out of use: 3.0g (100 to 300 Hz) Environmental conditions Component description During operation 5 to 45 ° C Humidity during operation relative air humidity 10 to 90%, non-condensing...
Page 118: Specifications Emc Iec 60601-1-2
AF emissions Class B The SEER 1000 is exclusively intended for use in all establishments, including domestic establishments and those directly connected to the CISPR 11 PUBLIC POWER SUPPLY, which also supplies buildings used for domestic purposes.
Page 119: General Specifications Table 202
Technical data General specifications table 202 Policies and MAKER statement - RESISTANCE TO INTERFERENCE ELECTROMAGNETIC The device is designed for use in the electromagnetic environment specified below. The customer or the device user must ensure that it is used in such an environment. test Test level IEC matching level...
Page 120 Technical data Policies and MAKER statement - RESISTANCE TO INTERFERENCE ELECTROMAGNETIC Field If there are faults it may be necessary to place Not applicable 3 A / m Magnetic with power the device further away from sources of magnetic fields of power frequency or install frequency (50/60 Hz) magnetic shielding: the magnetic field energy IEC 61000-4-8...
Page 121: Systems Of Non-Life Support Table 204
Technical data Systems of non-life support table 204 The device is designed for use in the electromagnetic environment specified below. The customer or user must ensure that the equipment is used in such an environment. interference Test level Level ence ELECTROMAGNETIC ENVIRONMENT - Policies resistance tests IEC 60601...
Page 122: Protection Recommended Distances Between Portable And Mobile Hf Communication
Technical data protection recommended distances between portable and mobile HF communication devices and the device table 206 protection recommended distances between portable HF communication devices and mobile and device The device is designed for use in an electromagnetic environment in which the quantities of radiated interference AF are controlled.
Page 124 GETEMED Medizin- und Informationstechnik AG Oderstr. 14513 Teltow, Germany Tel: + 49 3328 3942-0 Fax: +49 3328 3942-99 DISTRIBUTOR / Canada Private Label Manufacturer: GE Medical Systems Information Technologies, Inc. Distributor World Headquarters: Distributor European Headquarters: Distributor Asian Headquarters: GE Medical Systems GE Medical Systems GE Medical Systems Information Technologies, Inc.

GE HEALTHCARE SEER 1000 Usage Instructions

1 Introduction

2 Product Overview

3 Preparing for Recording

4 Measures after the End of the Recording

5 Apps - General Information

6 Using the Apple Ios App

7 Using Microsoft Windows App

8 Problems Solution

9 Maintenance

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GE HEALTHCARE SEER 1000

Table of Contents