Download Print this page

CDS COOK-N-DINE MO-70 Manual

Advertisement

Quick Links

~
1"
cool
2.5-3"
warm
TEPPANYAKI GRILL
COOK TOP SPECIFICATIONS
Size: Ø 70 cm x 4 cm H
~330 square inches HOT SPOT
total cooking area ~510 sq/in incl. warming
INDOOR + OUTDOOR USE IPX4 RATED
Material: Professional Food Grade Best Alloy
German Stainless Steel type 304 (V2A)
1/8" thick (3 mm) cold pressed, hand-
welded. Built-to-last. Silk-brushed finish.
Power:
2250 Watt | 240V | 10 AMP
Electric:
Analog temperature control:
1-10 dial | 2 indicator lights | thermostat
Contact Heat:
65º-230ºC
2 Year Manufacturer Warranty.
CE/ GS/ VDE Safety Approvals. Electrical +
Electronic Components: UL approved.
The manufacturer reserves the right to update, change, alter or discontinue any model without further notice.
SINCE 1887 - OVER 125 YEARS OF INNOVATION & PRECISION MANUFACTURING
27-1/2 inch Ø 70 cm
HOT Cooking Center
~
2
"A" box
3
"B" box front plate
PATENTED SHALLOW-DIP-TECHNOLOGY + CONTACT HEAT
~21 inch Ø
3
1
SOLID STAINLESS STEEL GRILL TOP
2
CONTROL BOX "B"
3
FLEXIBLE CONDUIT
STAINLESS STEEL MOUNTING BOLTS 1-3/4"
4
stainless steel washers & nuts included
2.4m POWER CORD, included
8
COOKING GUIDE, included
9
Ship weight 18 kg | ship size 93 x 74 x 13 cm
BUILT-IN
# MO-70
ULTRA
SLIM !
1-9/16"
(40 mm)
1
3
4
Shown accessories not included.
Model
2

Advertisement

loading

Summary of Contents for CDS COOK-N-DINE MO-70

  • Page 1 Model BUILT-IN # MO-70 PATENTED SHALLOW-DIP-TECHNOLOGY + CONTACT HEAT 27-1/2 inch Ø 70 cm ~21 inch Ø ULTRA HOT Cooking Center SLIM ! 1” 1-9/16” cool 2.5-3” (40 mm) warm TEPPANYAKI GRILL COOK TOP SPECIFICATIONS Size: Ø 70 cm x 4 cm H ~330 square inches HOT SPOT total cooking area ~510 sq/in incl.
  • Page 2 BUILT-IN Model # MO-70 INSTALL SHEET 1 of 2 Electrical Rating: 120V |1800 Watt |15 AMP | 50-60 Hz 1.8 kWh on high (alt. 240V/1800 Watt, 8 AMP or ProStyle 2250W-240V, 10 AMP) ALWAYS Check control box label for correct voltage BEFORE plugging in! Ø...
  • Page 3 BUILT-IN INSTALL DETAIL PAGE 2 of 2 Ø Ø Bolts/studs are 1-3/4 inch (45 mm) long; bolt/stud diameter is 3/16” (5 mm) drill 5/16” (8 mm) !!! VERY IMPORTANT: DO NOT CUT OR DRILL BEFORE UNIT IS PHYSICALLY PRESENT. DO NOT CUT OFF THE BOLTS/STUDS 8 MM | 5/16”...
  • Page 4 5. Connect the hollow extension to stem if needed (packed with nuts + washers). Slide dial knob onto stem (match flat side of stem with flat side of female receptacle at back of knob). Do not use force. The “0” has to align centered below the CDS logo.