Grandstream Networks GUV3100 Quick Installation Manual page 6

Na mesa/tripé:
O GUV3100 pode ser instalado na mesa/tripé diretamente usando seu
suporte embutido seguindo os passos indicados abaixo:
1. Mantenha o suporte giratório sob a unidade principal fechado, con-
forme mostrado na figura a seguir.
2. Posicione a unidade na mesa ou aparafuse a câmera no tripé usando
o orifício roscado na parte inferior do suporte GUV3100.
Observação: O tripé não é fornecido no pacote.
CONECTANDO E USANDO O GUV3100:
Depois de instalar o GUV3100:
1. Conecte o cabo USB ao computador, dispositivos de videoconferên-
cia ou outro dispositivo de entrada USB.
2. Abra o software de vídeo e selecione o dispositivo de vídeo para
obter a saída de vídeo.
Consulte os documentos online e as perguntas frequentes para obter
informações mais detalhadas:
http://www.grandstream.com/our-products
~ 9 ~
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
•
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
Canada Regulatory Information
CAN ICES-3 (B)/NMB-3(B)
~ 10 ~