Siemens SN63H800BE User Manual page 36

en Basic settings
Basic setting
EmotionLight
InfoLight
Tone volume
Wi-Fi
Remote Start
1
Factory setting (may vary according to model)
36
Display text Selection
1
E02 E00 - E02
1
I01 I00 - I01
1
b02 b00 - b03
1
Cn0 Cn0 - Cn1
1
rc1 rc0 - rc2
Description
Interior light.
¡ With the setting "E00"m the in-
terior light is switched off.
¡ With the setting "E01", the in-
terior light can be activated via
the ON/OFF button.
¡ With the setting "E02", the in-
terior light goes on when you
open the appliance door.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I00" switches InfoLightoff.
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start ", Page 38.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 38
¡ With the setting "rc2", the func-
tion is permanently activated.