Summary of Contents for EE Systems Group EE-ePW600
- Page 1 SMART Multi-Function Li-Ion Battery Power Bank Car Jump Starter & Electronic Device Charging (For cars with up to 6 cylinders or 3,500cc gasoline engines and small diesel engines) User Manual (Model: EE-ePW600)
- Page 2 1. Important notes 1. To keep this EE-ePW600 unit in good operating condition it needs to be recharged each time after using it to jumpstart a vehicle or for charging other electronic mobile devices. 2. If stored for long time periods this unit needs to be charged every 3 months.
- Page 3 6. Inverse charge protection 7. No sparks to ensure safety 8. Compulsory power fail-secure for exceeding 40 seconds 9. EC5 low voltage protection 4. Standard Package 1. EE-ePW600 (Unit) 2. Jump Start Cable 3. USB charging cable 4. User manual 3 / 8...
- Page 4 5. Product Layout 6. Operational Guidance 6.1 Power indicator 1. Press the power switch and the power indicator shows as below: Power indicator One LED Two LED Three LED Four LED 25％ 50％ 75％ 100％ Battery capacity 2. To ensure the most optimum situation of the battery this unit should be charged as soon as possible after using it to jumpstart vehicles or for charging other electronic mobile devices.
- Page 5 the wall charger and the micro USB plug into the micro USB input charge port of this unit to charge. 2. The LEDs will flash for the entire time it is charging. When it is fully charged then the 4 LEDs will stay ON with constant illumination. 3.
- Page 6 3. Insert the blue plug of the Jumpstart Cable into the socket of this unit and the red light will become illuminated. Connect the red clamp of the Jumpstart Cable to the positive (+) terminal of the car battery and the black clamp to the negative (-) terminal and then turn the ignition switch to start the engine.
- Page 7 ※ Notes： 1. Before jump starting the engine of vehicles, make sure the blue plug of the Jump Start Cable is securely inserted into the bottom of this unit. Otherwise a poor connection will fail to jumpstart vehicles and may even cause the blue plug to become burned.
- Page 8 5” x 3” x 5/8” Starting current 350A Peak current 700A Suitable for vehicle 12V Gasoline engine under 3,500 c.c. Operating temperature -20℃ ~ 60℃ Place of origin China EE Systems Group Inc. 1-877-579-3889 or info@eesgi.com 01152016 v1.2 8 / 8...
Need help?
Do you have a question about the EE-ePW600 and is the answer not in the manual?
Questions and answers