Advertisement
Quick Links
Advertisement
Summary of Contents for LP SV-2400
- Page 1 Lindgren-Pitman LP SV-2400 24-Volt Electric Dredge/Fishing Reel Instruction and Maintenance...
- Page 2 Thank you for purchasing the finest electric reel available. Please read this instruction manual in its entirety before operating the reel. The L/P SV-2400 is an investment that if taken care of, should provide many years of fishing. Typical 24-Volt Setup Power Requirement and Wiring: 24-volts DC Max 30Amps Plug –...
- Page 3 The SV-2400 is supplied with L/P reel base clamps shown above (the rod and rod butt are shown for illustration purposed only and are not included) with either 80 (1.343”...
- Page 4 Typically the line of choice will be preloaded by the retailer WARNING: never use a battery charger to run the SV-2400 as the power is not clean and it can damage the circuitry and void your warranty. Because of the materials used, the nylon or titanium spools do not require backing.
- Page 5 This button works two separate features. A quick push will either activate or deactivate the included clicker. When activated an internal speaker on the SV-2400 will make a single beep sound for each revolution of the spool similar to that of a traditional “clicker”.
- Page 6 Stop at Zero is activated by pushing both of the man buttons together for at least two seconds. This is one of the handiest features of the SV-2400 as it makes for truly “hands free” retrieval. WARNING: Once the “stop at zero” feature is activated it runs the reel until the counter hits 0000.
- Page 7 “Loading the Spool” section above. Low Voltage Indicator: Should you plug the SV-2400 be plugged into a 12-volt power source or the source voltage it too low the display will blink. This will not damage the electronics. SV-2400 Features: ...
- Page 8 NEVER use abrasive cleaners on the SV-2400, just soap and fresh water. Before any outing, test the reel prior departure to be sure all of the features are functioning correctly.
- Page 9 Warranty: The SV-2400 is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Lindgren-Pitman, Inc. will, at its sole option, repair or replace any component which failed in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost.
- Page 10 The SV-2400 is protected by Both Domestic and Foreign Patents Pending Manufactured in the U.S.A Lindgren-Pitman, Inc. 2615 N.E. 5 Avenue Pompano Beach, FL 33486 Phone (954) 943-4243 Fax (954) 943-7877 Email: sales@lindgren-pitman.com www.lindgren-pitman.com...
Need help?
Do you have a question about the SV-2400 and is the answer not in the manual?
Questions and answers