Lcd Description - Sampo EMF829 Instruction Manual

8. key：
1）Press this key to turn into manual reading mode. In this mode press this key to read
the next recording.
2）Press this key 2 seconds to turn into clear memory mode. In this mode press this key
to circle between" YES（Clear）" →" NO（Don't clear）".
3）In alarm limit setting mode press this key to decrease limitary value.
4）In CAL setting mode press this key to decrease CAL value.
9. The battery cover
10. Background light switch
11. Enable alarm switch

4-2 LCD description

1. 88：Record number（1~99）
CL：Memory clear mode
2. Displayed：Automatically turning off is enabled
Don't displayed：Automatically turning off is disabled
3. MAX：Maximum value is displayed
AVG：Average value is displayed
MAX AVG：Maximum average value is displayed
4. When the alarm is enabled this symbol means the currently measured value exceed the
limitary value.
5. ALM：Displayed：Alarm enabled or in the alarm limitary value setting mode
Don't displayed:：Alarm is disabled
6. Axis displayed：
X：X axis measured value is displayed
Y：Y axis measured value is displayed
Z：Z axis measured value is displayed
7. The measured value
8. uW/m², mW/m², and uW/cm²: Power density
9. uA/m and mA/m：Magnetic field intense