Matco Tools IMPACT13 Operating Instructions Manual page 3

28. This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.
29. Handling the brass parts of this product will expose you
to lead, a chemical known to the State of California
to cause birth defects and other reproductive harm.
Wash hands after handling.
service:
30. Light service must be performed only by the MATCO
authorized service centers listed. Service or
maintenance performed by unqualified personnel may
result in a risk of injury. Repair by unqualified personnel,
use of unauthorized parts, and failure to follow
maintenance instructions may create a risk of shock
or injury.
specific safety rules:
DO NOT let comfort or familiarity with product replace
strict adherence to cordless product safety rules. If
you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
FEATURES
• Super bright 13W fluorescent bulb (provides up to 330 lumens)
• Impact resistant, won't crack or break when dropped
• 18/2 SJTOW 25' UL cable remains flexible in cold weather and is oil and grease resistant
• Soft PVC handle and top-cap
• Fully enclosed safety switch
• 360° rotating hook for hands-free work
• PC clear tube for bright light
OPERATING INSTRUCTIONS
• To use, plug the unit into any 110-120V AC power source, such as a wall receptacle.
• Depress the swtich to turn on, depress the switch again to turn off.
TO CHANGE THE BULB
(see figure 1 to right)
• Unplug the light from any power source
before attempting ANY repair.
• Take off unit from bottom cap (#5).
• Remove the plastic tube and rivet (#1 and 2).
• Take off interior bulb and stand base (#3 and 4).
• Replace bulb.
• Assembly is the reverse of disassembly.
IMPACT13
IMPACT13 13W Impact Resistant Light
1. Hold light by insulated gripping surfaces when
performing an operation avoiding contact with hidden
wiring. Contact with a "live" wire will also make
exposed metal parts of the light "live" and shock
the operator.
2. Always be sure you have firm footing.
3. Be sure no one is below when using the light in high
locations.
4. Some material contains chemicals which may be toxic.
Take caution to prevent working dust inhalation and
skin contact. Follow material supplier safety data.
wArning: Misuse or failure to follow the safety rules
stated in this instruction manual may cause serious
personal injury.
note: The warnings and cautions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by
the operator.
1 2
3
figure 1
3
4 5
11/17/14