Wifi Ap - Techpro Elite Series User Manual

Please refer to the following sheet for detailed information.
Parameter
Max connection
TCP port
UDP port
HTTP port
HTTPS
RTSP port

5.8.2.4 WIFI AP

Please note this function is for some series only.
The WIFI AP interface is shown as in Figure 5-30. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.
Figure 5-29
Function
It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
The default value is 37777. You can input the actual port
number if necessary.
The default value is 37778. You can input the actual port
number if necessary.
The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
269