Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Bones Helen
- Page 1 Helen Manual www.bones.ch English...
- Page 2 I spelled w-a-t-e-r in her hand and did not think about it again until the end of breakfast. Later on we went to the water pump, where I let Helen holding her cup below the notch, while I was pumping. As the cold water gushed out and filled the cup, I spelled w-a-t-e-r in her free hand.
- Page 3 Top: Push continuously until after about 4 seconds a long vibration-joint will arise. Then single short joints will come. Keep the top button pressed and count the single joints until 3 joints have been carried out. Three o‘clock is now set. After having released the button, Helen acknowledges 3 o‘clock with three short joints.
- Page 4 Learning mode (Voice output). To learn the operation of Helen as easy as possible by a training, an acoustic help can be read out for an assistant via the built-in speaker. To activate, please press the combination of selector button and right arrow button and to disable selector and left arrow button.
- Page 5 Hold down the center button or the bottom one. The center button sets the 10-minute blocks, the bottom key the single minute steps. Finally, after setting the timer, it needs to be activated with the right arrow button. After the setting of the countdown, Helen will vibrate.
- Page 6 • time_vibra_delayset: Pause between confirmation setting mode and the first dial pulse, default 450ms. Also: time between time query and first pulse output. Don‘t worry if you erase a little too much in this text field. Helen will simply replace it automatically with its default values.
Need help?
Do you have a question about the Helen and is the answer not in the manual?
Questions and answers