Force RC Ground Target Instructions Manual

2
1
Push in lock and remove battery cover.
Green LED Accepts any hits.
Blue LED Accepts hits only from
Red and Green teams.
Red LED Accepts hits only from
Blue and Green teams.
7 Solid
6
Green LED
7 Red LED
Blue LED
Fully open lid. Press button to select
Team assignment for the Ground Target.
Optional Part: EFLC1005 6V AC Adapter
Note: To maximize battery life, the FORCE™ Ground Target will go into sleep mode if it does not detect a hit
from your FORCE helicopter within 20 minutes.
Push the power switch to OFF for 3 seconds, and then ON again to return the Ground Target to service.
For more information, please go to www.force-rc.com
Ground TarGeT InsTrucTIons
3
2
Install
AA batteries
Charged
First Hit
Target detects "attack." Front LED flashes
for 5 seconds and target makes an
explosion sound. When LED comes on
solid again, unit can detect attack.
Second Hit
Target detects "attack." Front LED flashes
for 5 seconds and target makes an
explosion sound. When LED comes on
solid again, unit can detect attack.
Third Hit
Target detects "attack." Front LED flashes
for 15 seconds and target makes
3 explosion sounds. When LED
comes on solid again, unit can
detect attack.
4
Fully
Install battery cover.
Push Power switch to ON.
Fly helicopter and fire on
Ground Target, or defend it
from an opponent.
When target is attacked,
light and sound show the hits.
8
LED Flashes.
After several
LED returns to Solid.
Always remove
batteries
after use.
5
Open ground target lid.
9
Explosions
sound.
seconds
When finished,
push Power switch to OFF
EN
6
1
1