**The customer must have access to a Verizon • Business data plan with voice capabilities OR Business Manager to manually modify the account.** • Janus 2-year plan (part # ATTPLAN-2) • Smartphone compatible plan required • Disable voicemail and call waiting •...
Page 4
5. Connect the phone(s). The Cellular Gateway provides an RJ11 jack or hardwired screw terminals for connecting devices. Do not exceed 1,000 feet. RJ11 Jack: a. Take a male RJ11 phone line cord or plug it into the J1A jack on the Cellular Gateway. b.
J8 - CANBUS: CANBUS can only be used with specific Avire products. See supplemental manual. J2 - External Antenna: Connect the provided external antenna to the J2 connector. Only antennas approved by Janus should be used otherwise the Cellular Gateway may not function properly and may be damaged. J3 - BATTERY...
LED Indicators This Cellular Gateway has five indicator LEDs that constantly report the device status. The indicators will be red, amber, or green. Each indicator will be fully on, fully off, or flashing. The table below provides an overview of what each colored LED indicates: RUN LED FLASHING...
Single Pair EMS5 System Wiring Diagram: Antenna Do not exceed 120vac 1,000’ Power Cellular Single PORTS Single Pair Gateway Pair TELCO Janus Elevator EMS5 Phone CALL DIRECTOR LOCAL ® SERVICE Building Communication System Janus COM-ERROR Elevator ACTIVE CALL CHARGING Phone...
The battery provides 4 hours of talk time. The battery should be replaced every 4 years. Only install batteries authorized by Janus, and only allow qualified personnel to replace the battery. The battery should be properly recycled and not disposed of with unsorted household waste. Please take all necessary precautions when changing the battery.