Parking Monitor; Rear Camera (Optional) - Parksafe PSV602 Instruction Manual

Dual dash cam with gps & wifi
Table of Contents

Advertisement

USE cont. ..

5 - Parking Monitor

The parking monitor setting button is on the opening page of the
you open it, the dash cam will begin to detect the car's movement.
If the car is stationary for more than 5 minutes and the
to the device, the Dash Cam will start Parking Monitor Mode*.
When the following 3 situations occur, the Dash Cam will start normal
recording:
1)
Mobile Phone is connected to the
2) Trigger Gesture capture
3) Continuous Vibration for more than 2 minutes.
NOTE:
*
Constant Power to the unit is required for this function

6 - Rear Camera (Optional)

You can install the optional rear Dash Cam on the rear window of your vehicle.
It is best to have it installed by a professional installer.
Connecting Rear Cam to Front Cam:
Front Cam
7 - Reset
Press the reset button for a few seconds to reset the device.
Reset
APP
+
0
6m Rear Facing
Dash Cam Cable
(Incl with Optional Rear Cam)
APP.
When
APP
is not connected
+
Pl
Oil
Rear Cam

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psv601

Table of Contents