Grace Company TrueCut Instructions

RULER GUIDE

Using the Lock Button:

normal position, the Safety Shield is locked until one or both of
the Release Buttons is pressed. Press and hold one or both of the
Release buttons to cut.
For convenience during long cutting sessions, switch
the Lock Button to the lock position while holding one
or both of the Release Buttons down. This will hold the
Release Buttons down for you, freeing the Safety Shield and
letting you cut continuously without having to push any buttons.
Remember to switch the Lock Button back to the normal
position for safety after your cutting session.
As an extra safety feature, you may switch the Lock Button to
the lock position with the Release Buttons out. This prevents the
Release Buttons from being pressed in, keeping the safety shield
always locked.

Tension Slider:

This adjusts how much pressure it takes to cut
when using the Ruler Guide. Move the slider to the top for more
tension or to the bottom for less tension (less tension is more
ideal for cutting multiple layers of fabric).

Rotary Cutter Instructions

With the Lock Button in the
Accurate:
The Ruler Guide interlocks with the edge of the
TrueCut Ruler (sold separately), letting you make straight,
precise cuts every time!
Easy:
As you move the cutter effortlessly along the ruler's
track, the guide keeps your cutter from veering away.
Safe:
The Ruler Guide keeps your fingers safer by preventing
accidental slips.
Safety Shield
Release Buttons
Tension Slider
Lock Button
(Normal position)
Lock Button
(Lock position)