Summary of Contents for Buckleys Surface Display Pro'
- Page 1 MANUFACTURERS OF SPECIALIST TEST EQUIPMENT Surface Display Pro’ Operating Instructions English Version Please read carefully before use...
-
Page 3: Table Of Contents
Surface Display Pro’ Contents Page Description Technical Data Safety Precautions Unpacking Operation Calibration Maintenance Disposal Information EC Declaration of Conformity UKCA Declaration of Conformity Contact Details Attention! Misuse or failure to comply with the guidelines outlined in this manual may impair the safety provided by the equipment. This symbol denotes important information on potential hazards. -
Page 4: Description
Pro’ than the one it was configured for may cause spurious readings. See certificate supplied separately. The Surface Display Pro’ is fully compatible with the BathyCorrometer Mk5, ® however it is not suitable for use with older Roxby unit or early Buckleys BCMs. BathyCorrometer ® probe tip ON/OFF switch... -
Page 5: Technical Data
Humidity: Maximum 80% non-condensing Safety Precautions Under normal operation the Buckleys Surface Display Pro’ Unit should present little or no risk to the user. However, as with any mains-powered device, it is advisable to take a few basic precautions to minimize any risk still further;... -
Page 6: Unpacking
Operation Buckleys’ Surface Display Pro’ (SDU) provides a surface readout of the corrosion potential voltage reading being taken by a diver operated BathyCorrometer Pro’. -
Page 7: Calibration
Surface Display Pro’ Calibration Note: It is important to ensure that the BCM, its half-cell and electronics are calibrated correctly prior to commencing a corrosion survey. Guidelines on how to do this can be found in the BCM Operating Instructions manual. The SDU has been designed so that calibration with a BCM can be easily carried out without the need for specialist equipment;... -
Page 8: Maintenance
Adjustment of the other controls will cause the Surface Display Pro’ to produce an incorrect readout. Maintenance The Buckleys Surface Display Pro’ has been designed so that no maintenance is required by the user. The Surface Display Pro’ should be inspected from time to time to check that the case, calibration leads and mains cable have not been damaged. -
Page 9: Ec Declaration Of Conformity
EC Declaration of conformity Buckleys (UVRAL) Ltd As manufacturer of the apparatus listed, declare that the product: Surface Display Pro’ Unit ® Is manufactured in conformity with European directives: 2014/30/EU 2014/35/EU Authorised by: J P Hoveman CEO, Buckleys (UVRAL) Ltd. -
Page 10: Ukca Declaration Of Conformity
As manufacturer of the apparatus listed, declare that the product: Surface Display Pro’ Unit ® Is manufactured in conformity with the following UK legislation Electronic Compatibility Regulations 2016 The Electrical Equipment (Safety) Regulations 2016 Authorised by: J P Hoveman CEO, Buckleys (UVRAL) Ltd. -
Page 11: Contact Details
Surface Display Pro’ Contact details Manufacturer: Buckleys (UVRAL) Ltd Address: Buckleys House Unit G, Concept Court Shearway Business Park Shearway Road Folkestone Kent CT19 4RG, UK Tel: +44 (0)1303 278888 Website: www.buckleysinternational.com Distributor details... - Page 12 Product registration Thank you for choosing a Buckleys product, we are sure it will provide you with many years of reliable service. Please register this product via Buckleys’ website and download the Warranty Registration Certificate. Register your product in 5 minutes...
Need help?
Do you have a question about the Surface Display Pro' and is the answer not in the manual?
Questions and answers