Advertisement
1. BEFORE YOU START
Scan this code
or search for
Cocoon Connect
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. A USB power source to charge the cameras
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
2. Charge Cameras
It is recommended you charge the batteries fully prior to use.
Connect the included USB cables to a USB power source (not
included)
3. Connect Base Station
Connect the base station to your router using the ethernet cable.
Connect the adapter into an electrical outlet
4. App Setup
First time users:
Register an account and follow the remaining prompts on screen
Advertisement
Table of Contents
Summary of Contents for Cocoon HE190087
- Page 1 2. A USB power source to charge the cameras 3. A Wi-Fi connection (have the password handy) 4. Download the Cocoon Connect app It is recommended you charge the batteries fully prior to use. Connect the base station to your router using the ethernet cable.
- Page 2 To add the first camera, press +Add Device. You will be asked to confirm that red indicator is blinking. Press next step and then next to From the main screen of the Cocoon Connect app, add a new connect the camera. For further detailed instructions please reference...
Need help?
Do you have a question about the HE190087 and is the answer not in the manual?
Questions and answers