Table of Contents
Advertisement
Useful functions
Activating voice functions
You can activate Siri or other voice functions with a remote controller button.
1
Connect the Bluetooth
2
Press [ ] twice quickly.
• The voice function on the Bluetooth
Note
• For details about voice function commands, refer to the operating instructions for the Bluetooth
• The voice function may not work depending on the smartphone specifications and the app version.
Blue edge LEDs
The unit is equipped with the blue edge LEDs on the right and left earphones. The blue edge LEDs are off by
factory default. They are set to off every time the unit is turned off.
∫ To turn the blue edge LEDs on
Press [+] and [–] simultaneously.
• A beep will sound.
∫ To turn the blue edge LEDs off
Press and hold [+] and [–] simultaneously for approximately 2 seconds.
• A beep will sound.
Note
• When the battery level is getting low, the blue edge LEDs will be turned off.
• When the blue edge LEDs are turned on, the LED indicator light will be turned off.
• When the blue edge LEDs are turned on, operating time will be shorter.
• The blue edge LEDs do not turn on while the LED indicator light is blinking alternately in blue and red.
Resetting the unit
This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using
the USB charging cord. All the previous operations will be canceled. (The pairing device information will not be
deleted.)
Auto power off
If the unit is not connected to a Bluetooth
5 minutes after you have stopped using it.
Battery level notification
When the battery level is low during use of the unit, the blue blinking LED will change to red. A beep will sound
every 1 minute. When the battery runs out, the power will turn off.
Operation
®
device and the unit. (
®
device will be activated.
®
device, the unit will beep and turn off automatically approximately
10, "Connecting a Bluetooth
l
15
®
device")
®
device.
Hide quick links:
Advertisement
Table of Contents
