Table of Contents
Advertisement
DMH25J HDMI WiFi Adapter
Mirror Mode (One -Way Control - Apple / Android)
Mirror Mode does not need any app support. Simply connecting the DMH25J
to the VX3026 and establishing a WiFi connection is all that is needed.
Mirror Mode w/ Touch Screen Control (Two-Way Control - Android Only)
Mirror Mode w/ Touch Screen Control will require an app to be downloaded
from Google Play Store. Search for "Jensen Screen Mirroring (SP) app .
Bluetooth Connection for Two-Way Control
Once the Jensen Screen Mirroring (SP) app is downloaded;
1. Establish a Bluetooth connection between your smartphone and the
VX3026.
2. Open the Jensen Screen Mirroring (SP) app on your smartphone.
3. Open the Settings Menu in the Screen Mirroring (SP) app and press Touch
Screen Calibration "Start" button.
4. Following the on-screen prompts.
5. Once the touch screen is calibrated, press System Settings to return to the
main Screen Mirroring page.
6. Press "Home Page" to access your smartphone screen.
Please refer to the instructions that come with the DMH25J for installation
and connectivity information.
Notes and information on DMH25J installation;
1. The VX3026 uses a chassis mount HDMI connector. Do not connect the
DMH25J directly to the VX3026 rear chassis HDMI connector or damage to
the DMH25J or VX3026 may occur. Use the short HDMI extension cable
(that is included) to connect the DMH25J and VX3026.
2. Power should be provided through the HDMI connector/cable to the
DMH25J. However, if the blue LED indicator does not light up (on the
DMH25J) connect a microUSB cable from the DMH25J to a USB port so
power can be provided to the DMH25J.
3. Try and locate the DMH25J as far away as possible from metal objects in the
vehicle. The DMH25J is a transceiver and close proximity to metal and other
objects may affect its performance.
Advertisement
Table of Contents
