JVC HR-XVC28BU Instructions Manual page 66

66
EN
Playback (DVD deck)
SYMPTOM
1. The button do not work.
2. The DVD deck can not be operated.
3. "X" appears on the TV screen.
4. "REGION CODE ERROR!" appears on
the TV screen.
5. The disc cannot be played back.
6. The language is not played back as you
set.
7. Changing audio/subtitle language is
not possible.
8. The subtitles do not appears on the TV
screen.
9. Angle cannot be changed.
POSSIBLE CAUSE
● The operation is prohibited on the
placed disc.
● The DVD deck is not selected.
● The operation is prohibited on the
placed disc.
● The disc's region number does not
match that of the unit.
● The disc's region number does not
match that of the unit.
● This type of the disc cannot be played
back.
● The disc is not placed properly.
● The disc does not contain the language
you set.
● The disc does not contain the audio/
subtitle in the multiple languages.
● The disc does not contain the subtitles.
● The subtitle display is set to off.
● A-B Repeat Playback is in progress.
( pg. 43)
● The scene is not recorded from the
multiple angles.
TROUBLESHOOTING (cont.)
CORRECTIVE ACTION
—
On the unit
Press VCR/DVD repeatedly so that the
DVD indicator lights up on the front
display panel.
On the Remote
Press DVD so that the DVD indicator
lights up on the front display panel.
—
Use the discs whose region number
includes "ALL" or "1." (
Use the discs whose region number
includes "ALL" or "1." (
See "Unplayable Discs" (
Remove the disc, then place the disc
properly in the disc tray. (
"Placing a Disc")
—
With some discs, the language should be
set on the top menu. (
—
Set the subtitles display to on. (
The subtitles recorded around A-B point
may not appear.
—
pg. 7)
pg. 7)
pg. 7).
pg. 8,
pg. 41)
pg. 44)