Subscribe to Our Youtube Channel
Related Manuals for RELM GPH-CMD
Summary of Contents for RELM GPH-CMD
- Page 1 GPH-CMD Operation and Programming RELM Wireless Technical Support (800) 422-6281 www.relm.com...
- Page 2 GPH-CMD Operation Transmit Indicate Busy Channel /Low Battery Indicate Programmable Switches Twenty channels per group. No-stop knob. Radio Beeps at upper and lower channel RELM Wireless Technical Support (800) 422-6281 www.relm.com...
- Page 3 GPH-CMD Operation Keypad Lock •Press and Hold FCN Key to Lock or Unlock Keypad •Radio beeps on key press when locked Empty Channels • If No Active Transmit or Receive Frequency is programmed the Radio will Display “DISABLED” and Emit an...
-
Page 4: Change Group
GPH-CMD Operation Priority One Assignment • With Scan Turned off press the PRI Key to Set the Selected Channel as Priority One Channel Keypad Function Select • Press FCN Key to Scroll Programmed Functions • Press PRI Key to Enable or Disable the Displayed Function •Factory Defaults: Repeater Talk-Around... - Page 5 GPH-CMD Pick List Operation Pick List Tone Selection •Use Number Keys to Select a Transmit Code Guard (1-32) from the Programmed Pick List Note: Assigning a Transmit Code Guard to a Channel Overrides User Select Operation View Tone Setting • Press FCN Key •...
- Page 6 GPH-CMD Command Operation Add Command Channel • Press the Key to Add Current Channel to Command Group • Channel is Assigned to Next Available Command Channel Selecting Command Group • Press # Key Twice to Select Command Group • Press Enter to Set Group Remove Command Channel •...
- Page 7 GPH-CMD Command Operation Delete Command Group • A Long * Key Press Removes all Channels from Command Group • While Holding the * Key the Radio will Emit an Alert Tone and Flash “Delete All” • When Command Group is Empty a Lower Alert...
- Page 8 GPH-CMD Programming Enter Password •Select Six Digit Password •Press Enter Key •Factory Default 000000 Group Parameters •Use FCN Key to Scroll Through Settings Group Options •1-7 Reserved •8- Add Group to Scan List Group Label •Clear Group Channel Label •Use Number Keys to Select Desired Symbol •Use FCN to shift left for next character...
-
Page 9: Channel Bandwidth
• Press CLR to clear Code Guard • User number keys to select desired frequency. (67 to 255.9 Hz) • Press ENT to set • Press # key to enter Digital Coded Squelch RELM Wireless Technical Support (800) 422-6281 www.relm.com... -
Page 10: Transmit Frequency
• Press ENT to set • Press # key to enter Digital Coded Squelch Channel Label •Clear Channel Label •Use Number Keys to Select Desired Symbol •Use FCN to shift left for next character •Enter New Label RELM Wireless Technical Support (800) 422-6281 www.relm.com... - Page 11 Programming Global Parameters Global Parameters • Use FCN Key to Scroll Through Settings Global Password • Press the CLR key • Enter a new six-digit password • Press the ENT key to store RELM Wireless Technical Support (800) 422-6281 www.relm.com...
-
Page 12: Global Options
When function 7 is enabled (flashing), the display will light for the programmed duration on any key press. 8. Silent Mode When function 8 is enabled (flashing), all radio alert tones are disabled RELM Wireless Technical Support (800) 422-6281 www.relm.com... - Page 13 When function 5 is enabled (flashing) the keypad becomes active for manual DTMF When functions 4 and 5 are both enabled (flashing) the ANI tone sequence is transmitted when the ENT key is pressed while transmitting. 6-8. Reserved for Future Option RELM Wireless Technical Support (800) 422-6281 www.relm.com...
-
Page 14: Backlight Settings
• Press Enter Key to Set Backlight Settings • Advance Backlight time by 1 second intervals with PRI key (Always On, Always Off or 1- 7.5 seconds) • Press Enter Key to set RELM Wireless Technical Support (800) 422-6281 www.relm.com... - Page 15 • Enter New Group Priority 2 Settings • Use Number Keys to Select Desired Priority Two Channel • Enter New Channel • Use Number Keys to Select Desired Priority Two Group • Enter New Group RELM Wireless Technical Support (800) 422-6281 www.relm.com...
- Page 16 GPH-CMD Cloning Select Target • Enter the Cloning Mode by Pressing the * Key • Select Target Radio Type with Long Press on * Key • Target Radio Type Options GPHCMD or GPH • Select Data to be Cloned with Long Press on # Key Select Data •...
- Page 17 The Master’s global data is converted to group data in the slave, and only the first 16 channels are transferred. When receiving an incoming clone from a GPH radio, the GPH-CMD radio ignores group data other than the group label and the group scan list bit.
Need help?
Do you have a question about the GPH-CMD and is the answer not in the manual?
Questions and answers