Table of Contents
Advertisement
Quick Links
ROBOT POOL CLEANER
ITEM: 75061
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST
Advertisement
Table of Contents
Summary of Contents for Xtreme Power 75061
- Page 1 ROBOT POOL CLEANER ITEM: 75061 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. -
Page 3: Features And Specifications
FEATURES AND SPECIFICATIONS The swimming pool cleaner independently scrubs, vacuums and filters your pool. No installation, no attachments. Just drop it in your pool and turn it on. XtremepowerUS features some of the best cleaning value on the market. Faster with more accurate cleaning and top access to filter media. -
Page 4: Parts Diagram / List
PARTS DIAGRAM / LIST... -
Page 5: Operation
OPERATION 1. Select the nearest 115V AC outlet protected by RCD. 2. The control box must be fixed at a minimum distance of 3.5m from the edge of the pool and a minimum of 2.5 over the top edge of the pool. NEVER operate the unit without fixing the control box first. - Page 6 OPERATION 7. After the pool has been cleaned, switch OFF on the power supply before removing the cleaner from the pool. 8. Remove the cleaner from the water at the shallow end of the pool by pulling the cable until the cleaner reaches the surface. Then lift it out of the water using the handle, NOT the cable.
-
Page 7: Maintenance
MAINTENANCE Clean the filter bags after each use: Use a garden hose to clean the filter bag. STORAGE When out of the water, store the cleaner in a dry location at temperatures between 4 °C- 46 ° C CABLE CARE With continued use, the cable may become coiled. -
Page 8: Troubleshooting
TROUBLESHOOTING If the cleaner fails to pick up fine or heavy debris: Clean the filter bags. A filter cleaning solution can be used to remove excessive dirt and/or sand. If the cleaner starts working momentarily but then stops working: Impeller may be clogged with debris. - Page 9 MAINTENANCE...
- Page 10 NOTE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 75061 and is the answer not in the manual?
Questions and answers