Advertisement
Quick Links
Advertisement
Related Manuals for Gared QUICK CONNECT PSS 9800
Summary of Contents for Gared QUICK CONNECT PSS 9800
- Page 1 QUICK CONNECT™ CART MODEL 9800 9200 E. 146 Street, Building A ● Noblesville, IN 46060 U.S.A.
-
Page 2: Basic Dimensions
QUICK CONNECT™ CART ASIC IMENSIONS Page -two- 9200 E. 146 Street, Building A ● Noblesville, IN 46060 U.S.A. - Page 3 QUICK CONNECT™ CART The GARED® Quick Connect™ Cart is a specially designed cart which allows users to easily store or quickly transport glass backboards. Further, with use of the Quick Connect™ Cart, it provides users a mechanism to lift and simplify replacement of backboards in a faster and safer setting.
- Page 4 QUICK CONNECT™ CART EMOVING ACKBOARD WITH Step by step instructions on removing a backboard with goal, from your GARED portable basketball units. STEP ONE (1) Lower and secure your basketball portable unit, to lowered position. Reference the portable unit Operation, Installation and Maintenance manual, on how to lower unit.
- Page 5 QUICK CONNECT™ CART STEP FOUR (4) On the portable unit, disconnect the upper braces from the backboard and rotate the braces out of the way. STEP FIVE (5) On the portable unit, remove the retaining clips and locking pin from the mounting plate(s) Page -five- 9200 E.
- Page 6 QUICK CONNECT™ CART STEP SIX (6) While supporting the backboard, turn crank handle on the cart and raise it up until the backboard comes off the hinges STEP SEVEN (7) Lean backboard on cart until it is sitting securely on the ledge. The Quick Connect™...
- Page 7 QUICK CONNECT™ CART NSTALLING ACKBOARD WITH Step by step instructions on installing a backboard with goal, on your GARED portable basketball units. STEP ONE (1) Lower and secure your basketball portable unit, to lowered position. Reference the portable unit Operation, Installation and Maintenance manual, on how to lower unit.
- Page 8 QUICK CONNECT™ CART STEP FOUR (4) While supporting the backboard, turn crank handle to raise cart up. The backboard mounting plate hinges need to slide over the coupling bracket (which is factory installed on the portable unit) STEP FIVE (5) Once the mounting brackets are in place, insert the locking pine and retaining clips.
- Page 9 QUICK CONNECT™ CART STEP SIX (6) On the portable unit, rotate upper braces and connect them to the backboard STEP SEVEN (7) After backboard is connect to portable unit, lower the cart by using the crank handle on the side of the cart The Quick Connect™...