Summary of Contents for Campania International Medici FT-53
Page 1
FT-53 Medici Ellipse Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 8 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF140 - 140 GPH Pump (6 ft.
Page 2
FT-53 Medici Ellipse Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-53 Medici Ellipse Fountain Assembly Instructions Step 7 - Place the pump cover (FT-53F) into the bowl with the pump at its center. FT-53F (9 lbs) 7.5"W x 9"H Step 8 - Holding the water feature (FT-53E) over the pump cover (FT-53F), insert the CPVC end of the tubing assembly into the coupling protruding from the bottom.
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.