Advertisement
5
Connecting to Audio Components
Option 1 - Best
TV, GAME, Blu-ray Disc
TM
Player,
DVD Player, Satellite Receiver or Cable Box
7
Bluetooth pairing
1)
Press
button on remote control to select the BT
(Bluetooth) mode.
2)
On your device (smart phone, etc.), select BW HTiB from
the list of available Bluetooth connections.
It will show "CONNECTED" on the Home Theater System
display.
Option 2 - Better
TV, GAME, Blu-ray Disc
TM
Player,
DVD Player, Satellite Receiver or Cable Box
Connecting the Antennas
Connect the AM and FM antennas to the AM and FM terminals on the
system's back panel.
Option 3 - good
VCR or TV
6
Pairing the Subwoofer with System
The Home Theater System and Subwoofer will pair up
automatically after power on.
If the pairing fails accidentally, please follow below steps to
reconnect:
1)
Press and hold the WIRELESS LINK button on the back of
Subwoofer and the OK button on the Remote Control at
the same time until the "WIRELESS" indicator blinks on the
System display.
2)
The "WIRELESS CONNECTED" indicator appears on Home
Theater System display, the pairing between Home Theater
System and Subwoofer is complete and successful.
Troubleshooting
AM / FM Operation
ST indicator is off.
• Adjust the antenna.
• Press MONO / ST button to insure you are not outputting in mono.
The signal is Mono. Severe hum or noise.
• The signal is too weak. Connect an external antenna.
• Adjust antenna.
• Reposition antenna away from any electronics.
There is interference to FM reception.
• Turn off other electrical devices (e.g. DVD, CD player) near the unit.
General
No audio.
• Make sure the speakers are connected.
• Check the input connections.
• Check the power cord connections.
• Make sure MUTE is off.
• Make sure the digital setting (optical, coaxial or analog) is correct.
• Check that the headphone is not inserted.
No audio from one channel.
• Check the speaker level setting.
• Check the speaker wire or external source cable connections.
Noise occurs when the TV is turned on.
• The TV is too close to the audio system.
No sound from the wireless subwoofer
• Turn off and turn on the Home Theater System and Subwoofer again.
• Set up the wireless subwoofer connection manually (Refer to the Pairing the Subwoofer
with System).
Printed in China
811-298191W020
Advertisement
