Table of Contents
Advertisement
• Remove the exterior and interior packing.
• Clean the interior surface with lukewarm water using a soft cloth. Do not use solvent-based cleaning agents or
abrasives on the interior. These cleaners may damage or discolour the interior.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the
refrigerator compartment.
Setting the Temperature Control
1. Insert the power supply cord into the electrical outlet.
2. Turn the thermostat dial to "7". Close the door and let the freezer operate
for 15-20 minutes.
3. After allowing your unit to run for 24 hours, you can adjust the temperature
setting to a warmer setting. We recommend for the unit to be set at 4 to run
as efficiently as possible.
To control the internal temperature, adjust the thermostat "1" is the warmest setting.
"7" is the coldest. The Dial may be set any place on the scale. It does not have to
be set exactly on a number.
Note:
Wait
3-5
minutes
The unit may fail to operate properly if restarted too quickly.
Defrosting your freezer
Defrost the freezer compartment when the ice/frost are approximately
¼" thick or every 3 months, whichever comes first and follow these steps:
1. Set the thermostat dial to "0" to defrost
2. Remove all contents from the freezer
3. Leave the freezer door open to allow accumulated ice/frost to melt and remove large pieces of ice as needed
4. After defrosting, remove accumulated ice/water and wipe the freezer compartment dry with a soft cloth.
Do not use boiling water because it may damage the plastic parts. NEVER use a sharp or any
metallic instrument to remove frost as it
void
the warranty.
Before first use
Use and Care
before
restarting
if
MUF65W | MUF65BLS
you
unplug
the
freezer.
may
damage
the
6
cooling
system
and
will
Advertisement
Table of Contents
