Advertisement
2. Attach the guide paper to the wall when determin-
ing the TV's installation site.
- Ensure the guide paper is level when attaching it to
the wall.
- Attach it by referring to the outer line of the TV and
the location of the TV center.
A
A
3. Fastening Anchors and Screws
• Check that the material and thickness of the wall
and finishing material comply with the installation
manual. Before beginning the mounting process, you
must be sure the wall is able to support the weight
of the TV.
• Should use the enclosed anchors and screws on
crack free concrete walls.
• If the wall is not made of concrete, the wall mount
must be installed on a rigid support. Never install
the product on a plasterboard or wall made of paper
or medium-density fiberboard (MDF). In this case,
make sure that the wall material can withstand the
weight of the TV, and fix the anchor screws to the
retaining wall (concrete) or wooden support behind
the finishing material. Since the anchors provided
with this product may not be suitable for your wall
material, be sure to check with a professional before
attempting installation.
• Other unspecified walls must be capable of support-
ing pullout loads of over 70 kgf (154.3 lbf) (686 N)
and shear loads of over 100 kgf (220.4 lbf) (980 N)
per fastener.
• Use an Ø 8 mm drill bit for concrete and a hammer
(impact) drill or Ø 4 mm drill bit for wood stud to
drill holes.
For installation on concrete wall
1. Drill holes in anchor locations with a drill bit of Ø 8
mm to a depth of 80 mm (3.1 inches) to 100 mm
(3.9 inches).
B
B
2. Clean the drilled holes.
3. Insert the enclosed anchors for fixing the wall
mount into the holes. (Use a hammer when insert-
ing anchors.)
4. Push the wall mount support closely toward the
wall to match the hole locations.
Anchors for fixing the wall mount
5
Advertisement
