ARKSEN 014-HG-14141 Operator's Manual

ARKSEN 014-HG-14141 Operator's Manual

Electric pressure washer with hose reel

Advertisement

CONTACT INFO
www.arksenusa.com
(949) 344-2588
ELECTRIC PRESSURE WASHER WITH HOSE REEL
3000 PSI | 1.76 GPM | 14.5 AMP
!
CAUTION! Do not use this advice before reading the instructions.
Model# 014-HG-14141
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 014-HG-14141 and is the answer not in the manual?

Questions and answers

Summary of Contents for ARKSEN 014-HG-14141

  • Page 1 ELECTRIC PRESSURE WASHER WITH HOSE REEL 3000 PSI | 1.76 GPM | 14.5 AMP Model# 014-HG-14141 OPERATOR’S MANUAL CONTACT INFO www.arksenusa.com CAUTION! Do not use this advice before reading the instructions. (949) 344-2588...
  • Page 2 Contents Product Description Purpose -------------------------------------------------------------- General Safety -------------------------------------------------------------------------------- ------------------------------------------------------------------ Additional Safety Instruction -------------------------------------------------------------------------- Risk of Electrocution ------------------------------------------------------------------------------------ Precautions Identification of Parts -------------------------------------------------------------------------- ------------------------------------------------------------------------------------ Technical Data First time instructions -------------------------------------------------------------------------- ------------------------------------------------------------------------------------ Safety Devices ----------------------------------------------------------------------------------- Thermal Sensor Operation instructions -------------------------------------------------------------------------- -------------------------------------------------------------------------- Connection of garden hose ----------------------------------------------------------------------- Mounting of high pressure hose ----------------------------------------------------------------------------------...
  • Page 3 • Before starting your machine, carefully check for defects. If • Only feed cold, clean water through this tool. Pressure you find any, do not start your machine and contact Arksen washer detergent may be used in the soap dispenser only.
  • Page 4 Identification of Parts Read the owner’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1.
  • Page 5 First time instructions Mounting of high pressure hose Attach the high pressure hose to the trigger gun and This section will explain in details how to make high pressure machine. washer ready for use. Detach the high pressure hose by pressing the pawl (A) or button (B) SAFETY DEVICES The unloader valve can reduce pressure if it exceeds pre-set...
  • Page 6 Activate the trigger of the trigger gun (1). Always adjust the 3 Attach the Cable Holder to the side of the body distance and thus the pressure of the nozzle to the surface, which is to be cleaned. Do not cover the machine during operation or use it in a room without adequate ventilation! NOTE: If the machine is left or not used for 5 minutes, it must be switched off on the start/stop switch (7) “O”:...
  • Page 7 Quick Connecting nozzles After use instructions The machine should be stored in a frost-free room! Pump, hose and accessories should always be emptied of water prior to storing as follows: Stop the machine (press the start/stop switch “O” and detach water hose, high pressure hose and nozzle Restart the machine and activate the trigger of the trigger gun Let the machine run until no more water runs through...
  • Page 8 • Clean the water inlet filter. • Nozzle blocked. • Clean the nozzle. Machine often starts • Pump/spray gun is leaking. • Please call Arksen customer service and stops by itself • Trigger mechanism is broken. Machine pulsating • Air in inlet hose.

Table of Contents