Download Print this page

Ericsson AIR Series Mount Instructions

Ericsson AIR Antenna Series Mount Instructions

The following instructions assume the user has read and understands the

AAT15 Quick Start Guide

available for download at https://www.sunsight.com/index.php/support.

What's included

1) Position the mount so that the vertical (AIR 11, AIR 21) or horizontal (AIR 32)

slot slides over the antenna lifting bracket.

2) Ensure front bumpers (x4) make contact with the face of the antenna and top

bumpers (x2) are in contact with the top of the antenna.

Sunsight AAT models AAT30 & AAT15

Ericsson AIR 11, AIR 21, AIR 32

AAT30, AAT15 User's Manual

and

1. AIR 11/21/32 mount with grip assembly

2. AIR mount securing strap

AAT30,

. Both documents are

Table of Contents

Need help?

Do you have a question about the AIR Series and is the answer not in the manual?

Page 1 Ericsson AIR Antenna Series Mount Instructions Sunsight AAT models AAT30 & AAT15 Ericsson AIR 11, AIR 21, AIR 32 AAT30, The following instructions assume the user has read and understands the AAT15 Quick Start Guide AAT30, AAT15 User’s Manual . Both documents are available for download at https://www.sunsight.com/index.php/support.
Page 2 3) Clip the supplied AIR mount retaining strap to one ear of the mount, then route the strap behind the antenna and beneath the upper antenna mounting bracket, then clip the loose end of the strap to the opposite ear on the mount. 4) Adjust strap tension so that the mount sits securely on the antenna and all bumpers are in contact with the antenna.
Page 3 2) Secure AAT and mount to structure with the included safety lanyard. Attach lanyard to AAT handle and secure to structure. Power on and connect to the AAT 1) Power on AAT. 2) Power on and enable Wi-Fi on the device being used to communicate with the AAT. AAT 901xxx Connect to the Wi-Fi hotspot .

Aat30Aat15Air 11Air 21 Air 32