Overview Artemis Servotorq II Quick Start Manual

Quick Start Guide
Artemis
Servotorq II™ Integrated Servo Motor
Part No. OVU20005 – OVU20010
Thank you for purchasing Overview's Artemis Integrated Servo Motor.
To quickly get up and running with your Artemis motor, please refer to the
Technical Manual, I²C Protocol Guide and Application Notes located at:
Please observe the following precautions when handling and

Reference Information:

The Artemis I²C control interface uses 12V signalling levels. Please see the
Technical Manual for further details and a reference interface circuit.
When initially powered up, the motor will perform an initialisation routine as
detailed in the Technical Manual. During initialisation, the unit will slightly
rotate and temporarily draw a current less than or equal to the max rated
current depending on the inertial load.
Overview House Kingswey Business Park Forsyth Road Woking GU21 5SA United Kingdom
© Overview Ltd 2021
http://www.overview.co.uk/technical-support/
operating the Artemis motor:
• The Artemis motor uses semiconductors which can be
damaged by electrostatic discharge (ESD). The motor
must be handled and stored in an ESD safe
environment.
• The Artemis motor's nominal supply is 48V DC, using up
to 1 A DC. Do not hot-plug the power supply.
www.overview.co.uk
Overview Limited
OVZ20022 Rev 3