Download Print this page

Synology Cube Station CS-406 Series Quick Installation Manual page 5

Synology cube station
Hide thumbs Also See for Cube Station CS-406 Series:

Advertisement

3
將上蓋往上提,然後拉出來。
将上盖往上提,然后拉出来。
위쪽 케이스를 들어 올린 다음 당겨서 제거하십시오.
Lift the upper case and then pull it out.
4
主機板上的四個黑色接頭是要接SATA排線的,另外四個白色接
頭是要接硬碟電源線的。每個接頭旁都印有硬碟識別號碼。
主机板上的四个黑色接头是要接SATA排线的,另外四个白色接
头是要接硬盘电源线的。每个接头旁都印有硬盘识别号码。
메인 보드에 있는 네 개의 검은색 커넥터는 SATA 케이블을
연결할 곳이고 4개의 흰색 커넥터들은 하드 디스크 전원 케
이블 연결용입니다. 커넥터 옆에 디스크 식별 번호가 표시되
어 있습니다.
The 4 black connectors on the mother board are for SATA
cables, and the 4 white connectors are for hard disk power
cables. You can see the disk identity numbers printed beside
the connectors.
HDD power cable
SATA cable
5

Advertisement

loading