Intec CVMHDVR706 Quick Installation Manual

Hide thumbs Also See for CVMHDVR706:

Advertisement

Quality First For Performance That Lasts
CVMHDVR706
Quick Installation Guide
1
Determine a secure and suitable moun ng loca on for your monitor. The monitor can be mounted either over-
head, on the dashboard or other suitable moun ng surface.
For more detailed installa on instruc ons or to install addi onal memory refer to you Operators Guide included on the CD or visit www.intecvideo.com/support.html
You may also call us toll free at 800-468-3254 (West) or 800-522-5989 (East) or e-mail support@intecvideo.com with any ques ons. Rev A 11/2018

Included in the box:

1 - CVMHDVR706 Monitor
1 - Sun Shield Kit
1 - Moun ng Bracket Set
1 - Moun ng Bolt Set
1 - Power / Camera Harness
1 - 16 GB Micro SD Card (Installed) 1 - Operators CD
! Please include this Quick Installa on Guide and CD with the other
vehicle documenta on provided to the end user.
1 - Emergency Event Bu on
1 - Wireless Remote Control
1 - GPS Antenna
1 - Microphone
1 - WiFi Dongle
When rou ng the cable from the exterior to the interior
of a vehicle, care needs to be taken to seal the entry
point. Failure to do so could allow in exhaust fumes,
other toxic gases or water.
Do NOT a ach the wiring to any moving parts, across
sharp edges or close to heat sources as this may cause
shor ng of the wires and may lead to a fi re or electrical
shock.
Be certain that all items are secure. Items that are not
secure or mounted in an unstable manner can come
loose and cause damage or personal injury.
Do NOT install the display in an area that will obstruct
your forward or side visibility.
Always verify the area being drilled into is of suffi cient
strength and is clear of all wires and other items around or
underneath so as not to cause damage.
Always confi rm proper image orienta on before driving
or opera ng your vehicle. The orienta on of the image
displayed is cri cal to safe vehicle opera on. An object
on the right side of your vehicle needs to be seen on the
right side of the display screen.
Before you begin driving, be sure the display controls are
adjusted properly. This will avoid unnecessary
distrac ons while driving.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CVMHDVR706 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intec CVMHDVR706

  • Page 1 Included in the box: 1 - CVMHDVR706 Monitor 1 - Emergency Event Bu on 1 - Sun Shield Kit 1 - Wireless Remote Control When rou ng the cable from the exterior to the interior 1 - Moun ng Bracket Set...
  • Page 2 Wiring Diagram Install the display bracket with the hardware provided. Use the bracket as a template for drilling the Monitor Connec ons required holes. The recommended moun ng bolt torque specifi ca on is between 15 and 17 inch pounds. CVHDxxM Series Cable and CVHDC10C...

Table of Contents