Table of Contents
Advertisement
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
6. Baud Rate: The rate of packet transmitting.
7. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your
ISP to get it. (Optional)
8. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can
contact to your ISP to get it. (Optional)
9. Assigned IP Address: If your ISP gave you a specified IP address, fill it here.
10. Extra Settings: Sometimes you have to add some extra AT commands to improve your
modem connection, fill it here.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.
3.1.3 DHCP Server
1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server function,
the following settings will be effective.
2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server will
automatically allocate an unused IP address from the IP address pool to the requesting
computer. You must specify the starting / ending address of the IP address pool.
3. Lease Time: DHCP lease time to the DHCP client.
4. Domain Name: This information will be passed to the clients. (Optional)
32
Advertisement
Table of Contents
