CONTENTS SAFETY INSTRUCTIONS ........................3 PROPER USE ............................4 PARTS LIST ............................5 ASSEMBLY ............................. 6 How to attach loops ..........................9 ENVIRONMENT PROTECTION ......................11 TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ..........11...
SAFETY INSTRUCTIONS • The maximum weight limit is 100 kg. This limit cannot be exceeded. • Read the manual before first use and keep it for future reference. • Only use the trampoline in accordance with this manual. Any other use may result in injury, or even death.
• The trampoline should not be exposed to direct sunlight, freezing temperatures, high moisture or rapid changes in temperature. It could become irreparably damaged. PROPER USE • Before every use, make sure all parts and screws are in place and sufficiently tightened. Regularly check all components for wear or damage.
Handles Hand knob Bolt M6x15 Small washer Bolt Wrench Bolt M6x35 Tool to attach loops Loop cover ASSEMBLY Step 1 Connect the frame (1) with bolts (14), washers (10) and nuts (11), see. picture.
Page 7
Step 2 Remove the covers from the legs (2) and attach the legs (2) to the frame (1) with bolts (14), washers (10) and nuts (11). Step 3 Attach the loops (4) to the jumping mat (3).
Page 8
Step 4 Attach the jumping map (3) to the frame (1). First attach the two loops (4) to the opposite corners and then always attach the loops to each other.
Page 10
Step 5 Attach the lower part of the handle (5) to the frame (1) with bolts (9), washers (10) and nuts (11). Step 6 Attach the upper part of the handle (6) to the lower part of the handle (5) with hand knob (8).
Step 7 Attach the handle (7) to the upper part of the handle (6) with bolt (12). ENVIRONMENT PROTECTION After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the local laws and environmentally friendly in the nearest scrapyard. By proper disposal you will protect the environment and natural sources.
Page 12
The seller is SEVEN SPORT s.r.o. with its registered office in Strakonická street 1151/2c, Prague 150 00, Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section C, Insert No. 116888. According to valid legal regulations it depends whether the Buyer is the End Customer or not. “The Buyer who is the End Customer”...
Page 13
damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described in this paragraph.
Need help?
Do you have a question about the Hexagon IN SP1112 and is the answer not in the manual?
Questions and answers