Table of Contents
Advertisement
Quick Links
WI-FI MONITORING SYSTEM ZMB-01
DESCRIPTION
The ZMB-01 system is used for simulta-
neous viewing images from 9 wireless
cameras and recording them on a hard
drive (the system includes 2 cameras,
while the remaining items can be or-
dered separately as ZMB-01/C, depend-
ing on the needs). After connecting a
recorder to the Internet, the user can ac-
cess the device online using an Android
or iOS application.
The system includes:
• Recorder - 1 item,
• 2 MP camera - 2 items,
• 12 V / 2 A recorder power supply - 1
item,
• 12 V / 0.5 A camera power supply - 2
items,
• Expansion plugs and culverts for the
cameras.
• Mouse, RJ45 cable.
The device should be
connected to a one-phase
network in accordance
with legally binding stand-
ards.
The
NOTE
method is described in
this manual. Any activities
related to installation, connection, and
adjustment should be performed by qual-
ified electricians who have read this us-
er's manual and familiarised themselves
with device functions. Removing the
enclosure voids the warranty and poses
a risk of electric shock. Before installa-
tion, make sure that there is no voltage
on connection cables. To install the de-
vice, use a cross-head screwdriver with
a diameter of 3.5 mm. The proper opera-
tion of the device is affected by how the
device is transported, stored, and used.
It is not advisable to install the device in
the following cases: lack of any compo-
nents, damage to or deformation of the
device. If the device operates improp-
erly, please contact the manufacturer.
Do not dispose of this device in
the trash can with other waste! In
order to avoid harmful effects on the
environment and human health, store
used device in specially designated
places. Household electronic waste
can be returned for free and in
any amount to the collection point
established for this purpose, and
also to the shop when buying new
equipment.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com, e-mail: export@zamel.pl
TECHNICAL DATA
Maximum number of cameras: 9
Recorded image resolution: 1920x1080
Weight (without the hard drive): 479 g
Housing protection rating: IP66
connection
APPEARANCE
ZAMEL sp. z o.o.
RECORDER
Power supply: 12 V DC
Power consumption: 4.1 W
Frequency: 2.4 GHz
Compression method: H.265/H265+, H264/H264+
Range: up to 300 m in open area
Video outputs: 1x HDMI, 1xVGA
Plug-in socket: 1xRJ45 (10M/100M)
Hard drive socket: SATA
USB slot backup, mouse plug-in
Remote access: ANDROID and iOS application or online
Dimensions: 215 x 230 x 180 mm (with the antennas unfolded)
CAMERA
Power supply: 12 V DC
Power consumption: 1.7 W
Matrix type: 2MP (1080p), 1/2.9" CMOS Sensor HISILICON Hi3516C
Infrared: 20 LEDs of ca. 25 m in light range
Weight: 284 g
Dimensions: 73 x 160 x 160 mm (with the antenna unfolded)
Antennas
USER MANUAL
Power supply socket
USB port
HDMI monitor socket
VGA monitor socket
Audio output
LAN socket
Power status signaling
Hard drive status signaling
plik: ZMB-01_inst_gar_gb | modyfikacja: 11.01.2021
Advertisement
Table of Contents
Related Manuals for Zamel gardi ZMB-01
Summary of Contents for Zamel gardi ZMB-01
- Page 1 WI-FI MONITORING SYSTEM ZMB-01 USER MANUAL ZAMEL sp. z o.o. ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamel.com, e-mail: export@zamel.pl DESCRIPTION TECHNICAL DATA RECORDER The ZMB-01 system is used for simulta-...
-
Page 2: Installing The Hard Drive
INSTALLING THE HARD DRIVE To install the hard drive: Disconnect the power supply cable from the recorder. Unscrew 5 screws at the bottom of the device - Fig. 1. Connect the SATA hard drive to the correct terminals (power supply, data transmission) - Fig. 2. Screw the hard drive to the recorded using the screws provided with the system and designated holes in the housing - Fig. -
Page 3: First Start
After completing all connections and powering the recorder and the cameras, the monitor should display the home screen with the ZAMEL logo, meaning that the system was started. After a few seconds, the device will start the system and the main screen with the configuration wizard will be displayed (Fig. -
Page 4: Adding Cameras
However, if, for any reason, the cameras are not displayed on the list of devices or if additional cameras are added (offered by Zamel as product with the symbol: ZMB-01/C), program each camera for the recorder by following the instructions below: •... - Page 5 PLAYING THE FOOTAGE To play the material recorded by a given camera, click on the “Play” icon in the main menu. In the open window (Fig. 16) in the upper right corner, in the calendar, select the day, for which the recorded footage is to be played. Below the calendar, select the camera (channel number), for which the footage is to be played.
- Page 6 REMOTE ACCESS FROM THE APPLICATION (ANDROID, IOS) The device can be remotely accessed through an application installed in the Android or iOS system on a mobile device. The recorder needs to be correctly connected to the Internet (See “First Start” in this manual) and the BitVision application needs to be installed on the phone or tablet.
- Page 7 • In the opened window as in Fig. 25, add the serial number of the device by scanning the QR code from the recorder’s menu or by entering it manually. Fig.25 • To find the code in the recorder’s menu, click on “Configuration”, and then “Network” in the main menu and go to the P2P tab (Fig. 26) to access the recorder’s encoded serial number in the form of a QR code (3 from the left).
-
Page 8: Warranty Card
4. ZAMEL will review complaints in accordance with existing regulations.; 5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL. 6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy between the goods and the contract.