Connec Ons; Power/Swc - Boss Audio Systems ELITE BE62CP User Manual

Power/SWC

UTION
It is recommended to have the product
professional.
UTION
-
prevent damage to the product, and/or
possible injury.
CAUTION
If several ampli ers are to be used, it is
recommended to use a relay for the Remote
Out trigger.
Red/White, Rear Camera Power
(+12V, 500 mA)
Front Camera Power
Red/Violet,
(+12V, 500 mA)
SWC Input
Orange
Red , Accessory (+12V)
Black, Ground (-)
Yellow, Constant (+12V)
Violet/White, Reverse Signal Input (+12V)
Blue, Antenna Output (+12V, 500 mA Max)
Blue/White , R
em. Output (+12v, 500 mA)
27
Note
Unused input/output wires need be
insulated with tape, heat shrink, or crimp
connectors. Never use wire nuts.
Note
A separate interface might be needed for your
consult with a professional installer.
te
When replacing the fuse, always do so with
the same type and value (15 A).