Summary of Contents for Impact Test Equipment MH630
- Page 1 Vibrating Hammer Makita 240V / 110V MH630/MH631 Impact Test Equipment Ltd www.impact-test.co.uk | www.impact-test.com User Guide User Guide...
- Page 2 Impact Test Equipment Ltd Building 21 Stevenston Industrial Estate Stevenston, Ayrshire KA20 3LR Tel. 01294 602626 Fax. 01294 461168 sales@impact-test.co.uk Test Equipment www.impact-test.co.uk Test Sieves & Accessories www.impact-test.com...
-
Page 3: Specifications
MH630 240V / MH631 110V Vibrating Hammer MH630 SPECIFICATIONS Model MH630/MH631 Blows per minute 1,100 - 2,650 min-1 Overall length 449 mm Net weight 5.1 kg Safety class Due to our continuing program of research and development, the specifications herein are subject •... - Page 4 The manufacturer declares that the following machine: Designation of Machine: Demolition Hammer Model No./ Type: MH630/MH631 are of series production and Conforms to the following European Directives: 98/37/EC until 28th December 2009 and then with 2006/42/EC from 29th December 2009...
- Page 5 MH630 240V / MH631 110V Vibrating Hammer MH630 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 6 MH630 240V / MH631 110V Vibrating Hammer MH630 attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
-
Page 7: Functional Description
MH630 240V / MH631 110V Vibrating Hammer MH630 Be sure the bit is secured in place before operation. Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation. - Page 8 MH630 240V / MH631 110V Vibrating Hammer MH630 Speed change The blows per minute can be adjusted just by turning the adjusting dial. This can be done even while the tool is running. The dial is marked 1 (lowest speed) to 5 (full speed).
- Page 9 MH630 240V / MH631 110V Vibrating Hammer MH630 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Side handle (auxiliary handle) For tool with stick type side handle Side grip (auxiliary handle) The side grip swings around to either side, allowing easy handling of the tool in any position.
-
Page 10: Operation
MH630 240V / MH631 110V Vibrating Hammer MH630 Bit angle The bit can be secured at 12 different angles. To change the bit angle, slide the change ring forward, then turn the change ring to change the bit angle. At the desired angle, slide the change ring back to the original position. - Page 11 MH630 240V / MH631 110V Vibrating Hammer MH630 Run the tool for several minutes to warm it up. Switch off and unplug the tool. Loosen the four screws and remove the handle. Note that the top screws are different from other screws.
- Page 12 MH630 ACCESSORIES CAUTION: These accessories or attachments are recommended for use with the MH630/MH631 Vibrating • Hammer specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 13 Impact Test Equipment Ltd Building 21 Stevenston Industrial Estate Stevenston, Ayrshire KA20 3LR, United Kingdom (+44) 01294 602626 www.impact-test.co.uk sales@impact-test.co.uk...
Need help?
Do you have a question about the MH630 and is the answer not in the manual?
Questions and answers