Initial Camera Setup
Installing and Charging the Battery
To Charge the Battery:
1. Insert the battery (as shown above).
2. Power off the camera.
3. Connect one end to the supplied USB cable to
the camera and the other end to the computer's
USB port or to the AC Charger (which is then
connected to a standard wall socket).
4. Allow the battery to charge for at least 3 hours
before using the first time.
5.
The charge light will turn off when the battery is
fully charged.
Turning On the Camera
Installing the Memory Card
Micro SD Memory card (up to 32GB, Class 4 or
above) needed for normal use.
Using the Camera
4