Vivitar ViviCam X122 User Manual page 7

 Do not mix alkaline and non-alkaline batteries.
 Some features will not work, such as Flash, if the battery power level is low.
 When the battery power is low the battery icon turns red and the camera will automatically
turn off a few seconds later.
 Rechargeable batteries not recommended.
 The energy status of the power is displayed on LCD as shown below:
Full battery power
empty battery icon and 'Low Power' appear flashing red on the LCD, this
When the
indicates that the batteries should be replaced as soon as possible. The camera will power off
automatically once 'Low Power' is shown.
MICRO SD MEMORY CARD
Make sure a Micro SD card has been properly inserted into your camera.
Micro SD card not included.
To properly insert the Micro SD Memory Card:
1) Push the SD card into the slot in the direction shown on the camera (see icon by the SD
card slot). Refer to images #1 and #2 below.
2) Push the SD card until you hear a slight clicking sound. This indicates the SD card has been
inserted correctly.
Medium battery power
Refer to images #3 and #4 below.
6
Low battery power