Advertisement
Quick Links
MW01 QUICKSTART
FOR MORE INFORMATION
support@masterdynamic.com
Follow Us - @masterdynamic
www.masterdynamic.com
ON
To Power ON, pull the MW01 into the extended position.
PAIRING INDICATOR
A pulsing white light indicates
•
the MW01 is in pairing mode.
A solid white light indicates a
•
device is connected.
The first time you power ON the MW01 it will automatically
enter pairing mode. To manually activate pairing mode,
leave the MW01 in the extended position for 5+ seconds
and look for the pairing indicator light. Once in pairing
mode, activate pairing mode on your earphones or
headphones and place them adjacent to your MW01.
USING THE DEVICE
The MW01 will automatically connect to previously
connected headphones/earphones. Select the number
of prongs required to connect to your intended device.
If using a one-prong connection, use only the prong
marked "1".
Once prongs are selected, push down to retract the
MW01 and connect the prongs to your analog device.
Advertisement
Related Manuals for Master&Dynamic MW01
Summary of Contents for Master&Dynamic MW01
- Page 1 The MW01 will automatically connect to previously Once prongs are selected, push down to retract the The first time you power ON the MW01 it will automatically connected headphones/earphones. Select the number MW01 and connect the prongs to your analog device.
- Page 2 Connect to your first earphone or headphone, then activate pairing mode again by putting the MW01 Master & Dynamic, the Stylized M Logo and Sound Tools into the extended position and tucking away both prongs. Do not power OFF. Once the MW01 is in pairing If no headphones or earphones for Creative Minds are trademarks of New Audio LLC.