Washing Programmes Table - Midea MT1250G Owner's Manual

OPERATIONS

Washing Programmes Table

Programmes are available according to the laundry type.
Only for washers having these function
XXXX XXXX
XXXX XXXX
Programmes
XXXX XXXX
XXXX XXXX
Standard(Normal)
Delicate
ECO
Heavy:
Quick:
Baby Care:
Air Dry
Tub(Drum) Clean:
Fuzzy weighting:
FCS
Soak
Memory:
Soft:
Strong:
Standard fabric washing program, suitable to wash ramie cotton fabric.
Delicate wash, especially for silk fabrics.
1 time rising is suitable for light contaminated clothes in order
to save water.
Suitable to wash heavy stained/wearable clothes.
Suitable to wash light stained clothes and clothes in summer.
Increase the rinsing times, to reduce the detergent residue on the clothes.
Suitable to wash children's clothes.
As for not easily fading, deforming , and non-waterproof clothes ,
can use the function to dry clothes without heating, and to reach
the result of being dried in a room.
By the intermittent spinning, clean the dirt of inner & outer tub
and impeller.
The washing machine will select the water level automatically
according to the load weight.
1. When there's water in the tub, this function is not available;
2. Before press [Start/Pause] button, if consumer selected the
water level, there will be no fuzzy weighting function;
3. After press [Start/Pause] button, the washing machine will run
the fuzzy weighting function. Consumer can also select the water
level to set the water level as needed.
Start up Fast Clean Stystem : Power on, select "Normal","Soft",
"Soak","Strong" program, then press FCS button. then press
"Start/Pause" button, FCS function starts up. The relative figures
will be showed after FCS function starts up.
Cancellation of FCS function: when the FCS function was selected,
The function can be cancelled by pressing any button except
"Water level","Delay",or power off.
Press the button to select soak time.
Memory procedure, It can remember all the washing parameters
which users have set up, such as water level, washing time, rinsing
times etc. Memory procedure is effective after you press the
start/pause button, next start when you choose the Memory procedure,
You can see all the state which you choose last time.
Mid/High/Low water level selection, the tempo is soft, slow washing
and spinning speed, to make the lightest wear and deformation.
The wash time is longer, the stream is stronger, so the washing
effect is better.
10
16