Page 5
Step 1: Place the tabletop () upside down. After that, attach the legs (2) to the tabletop with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´...
Page 6
Step 3: Use 5/16´´ x 5´´ bolts (A) to attach the Cross Supports-B (3) to the legs. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 5´´ Bolts Step 4: Turn tabletop over its feet. After that, attach the benches (5) to the cross supports with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 7
Step 5: Finally, use 5/16’’ x 3 ½’’ bolts () to attach each diagonal support () to the benches. After that, attach the diagonal supports to the legs with 5/16’’ x 4 ½’’ bolts (). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 8
This completes the Picnic Table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 7 KID’S ROUND WOOD PICNIC TABLE KIT www.ForeverRedwood.com...
Need help?
Do you have a question about the KID'S ROUND WOOD PICNIC TABLE KIT and is the answer not in the manual?
Questions and answers