ViewSonic VX2882-4KP User Manual page 35

1
1ms Mode <MPRT>
Choose whether to activate Moving Picture Response Time (MPRT); default
setting is Off.
NOTE:
1. Make sure Input Timing detection is >100Hz to turn on 1ms Mode
from default.
2. If 1ms Mode is set to "On", when turning on Adaptive Sync, MPRT
will automatically turn off.
3. When 1ms Mode is set to "On", the following functions will be
grayed out and disabled: Brightness, Advanced DCR, ECO Mode,
sRGB, Response Time, and DDC/CI Brightness adjustment.
4. sRGB and 1ms Mode will disable each other.
5. The IC controls Moving Picture Response Time, so the overall
Brightness will be dark.
35