3-5.2 Generate Mode; Figure 3-5. Phase Modulation; Figure 3-6. Generate Mode - General Dynamics R2600 Series Operator's Manual

3-5.2 GENERATE Mode
The GENERATE mode (figure 3-6) configures
the Analyzer to generate an RF signal at a
controllable output level to provide for a wide
range of receiver testing.
andexternal modulation

Figure 3-5. Phase Modulation

Multiple internal

Figure 3-6. Generate Mode

26
signals can be simultaneously impressed on the
carrier frequency to generate composite signals
for servicing. Signals from 400 kHz to 999.9999
MHz may be generated. Center frequency is set
in 100 Hz increments.