Integrity Shark Base Instruction

PARTS
PART DESCRIPTION
1 Nailing Bar
2 Nail Holes
3 Anchor Holes
4 Timber Post Holder
5 Notching Lever
INSTALLATION
MINIMUM 25 mm (0.98")
FASTENING TO
PLYWOOD
(NAILING OPTION)
Integrity Worldwide Inc.
www.iwwinc.ca
!!! REFER TO GENERAL NOTES FOR SAFETY INFORMATION !!!
BACK
FOR MORE TECHNICAL INFORMATION CONTACT US AT:
• Place the Shark Base with the side opposite the C-shape nailing bar
a minimum 25mm (1") from the working edge
• At the back of the Shark Base hammer four (4)
a 45° angle into the four nailing holes
• For a 90 kg (200 lb) rating use six (6)
nailing bar. Two (2) of the six (6) nails must be nailed into the nailing bar
opposite the other four (4). Alternatively in place of nails, you may use four
(4) #8,
50 mm (2") wood screws.
• For a 136 kg (300 lb) rating use eight (8) " diametar x 2" nails into the nailing
bar. Four (4) of the eight (8) nails must be nailed into the nailing bar
opposite the other four (4). Alternatively in place of nails, you may
use six (6) #8, 50 mm (2") wood screws.
5
FRONT
info@iwwinc.ca
Shark Base
Instruction
Code:
SB
4
Weight:
4.4 kg (9.7 lb)
Maximum Spacing:
2743 mm (108")
3
nails at
" diameter x 2"
" diametar x 2" nails into the
1
2