Table of Contents
Advertisement
as possible.
Type number :
come together with a replacement lamp for this projector.
1.
Turn the projector off, and unplug the power cord. Allow
2.
3.
4.
5.
cover. It is recommended to leave the coarse meshed
6.
while holding it so it will not be sucked in. Use a vacuum
or heavily soiled, replace them with new ones.
7.
turning its plastic band side up.
8.
9.
(1) Press the MENU button to display a menu.
(2)
(3)
WARNING
NOTE
or turn off the projector, to prevent the internal heat level rising.
UX37191
.
3.
Intake vent
7.
(coarse meshed)
Plastic
band
.
17
To
Advertisement
Table of Contents
