Page 6
Step 2: Attach the frontal wall (3) to the lateral walls with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 5´´ Bolts P| 5 STORAGE SHEDS www.ForeverRedwood.com...
Page 7
Step 4: Attach the roof panel (5) to the lateral walls with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 5´´ Bolts P| 6 STORAGE SHEDS www.ForeverRedwood.com...
Page 8
Step 6: Use 2´´ Deck Screws (C) to attach the roof boards (6) to the roof panel. Put the boards from the bottom to the top, the overlapping between these boards it will be of ¾´´ approx. Each part has a series of numbers that indicate where to attach the part with the corresponding number. P| 7 STORAGE SHEDS www.ForeverRedwood.com...
Page 9
Step 8: Finally, use 3´´ Deck Screws (D) to attach the knee braces (8) to the shelves and to the walls. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3´´ Deck Screws P| 8 STORAGE SHEDS www.ForeverRedwood.com...
Page 10
This completes the Storage Sheds Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.
Need help?
Do you have a question about the STORAGE SHEDS and is the answer not in the manual?
Questions and answers